Boats for sale in Orangevale, California

1991 Cabo Yachts 2400 Helmsman

$40,000

Orangevale, California

Year 1991

Make Cabo Yachts

Model 2400 Helmsman

Category Pilothouse

Length 24

Posted Over 1 Month

Per the Seller: all mechanical and electrical systems on the boat function as designed. Very current, fully integrated Furuno electronics package with radar, GPS and fish-finder. The cushions in the cabin are frayed. Stock #334865 WOW! LOW HOURS RARE CABO HELMSMAN WALKAROUND WITH TRAILER! Cabo boats have a real cult following for their rugged construction and sea kindly manners. This example is a rare trailerable 24-foot pilothouse with V-Berth. The unobstructed deck is flush so there is a lot of room with nothing to get in the way. This boat has a custom bait tank with bait up trays. An oversized fish locker will provide plenty of space to keep your catch. There is a swim step, flood lights, and a remote spotlight. In the cabin the helm station is well equipped with full instrumentation and a comfortable captain's chair. Center is the Furuno multifunction display with radar, GPS, fish-finder and electronic compass. To port is another comfortable captain's chair. There is overhead rod storage in the cabin and rod storage on both gunnels. The pilothouse offers an enclosed head with a toilet plumbed to a holding tank and a small stainless steel sink. In addition to the v-berth racks the table makes into a 6'6" bunk. The galley offers a microwave, large sink and a refrigerator that runs off an inverter. Power is provided by a Mercruiser MCM 7.4L big bock V8 with just 337 hours on it.

2002 Mastercraft X9

$21,500

Orangevale, California

Year 2002

Make Mastercraft

Model X9

Category Ski And Wakeboard Boats

Length 21'

Posted Over 1 Month

2002 Mastercraft X9,Used 2002 MasterCraft X9 in excellent condition. Great Wake-Board & Ski Boat, 520 original hours. Has always been stored inside and has only had 2 owners. All service work has been done at MasterCraft dealerships. The stereo system was upgraded in 2011 and there are 4 tower speakers and new interior speakers and sub. Includes board racks, bimini top, depth finder and cruise control. This is a great buy, selling it because buying new. $21500

17' 1998 Yamaha Exciter 270

$7,999

Orangevale, California

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

Please call owner Jacob at 916-204-9510. Boat is in Orangevale, California. I am selling my 1998 Yamaha Exciter Jet boat 270 HP twin engines. Please see photos. All the options and more. Bimini Top No rips, No rips in cushions, well maintained. Excellent running condition. Brand new 2014 trailer with detachable tongue. Sound system including Pioneer amplifier and 10" subwoofer. Wake board tower with rack and mirror arm. In the photos you can see I have attached the NADA pricing guide so please NO LOW ball offers and NO TRADES. Serious cash buyers only! See contact info

Wakeboard Tower Articulating Mirror Arm with Mirror

$125

Orangevale, California

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

DIYWAKE FULLY ARTICULATING MIRROR BRACKET AND MIRROR This auction is for one Diywake fully articulating mirror arm and 13.5" x 6" mirror. This item is brand new and in the origanal manufacturers package. It is made of solid polished aluminum. Get rid of that difficult windshield mounted mirror and move it up and out of the way with this quality exact fit mirror bracket and mirror. Features They come in sizes 1 1/2", 1 5/8", 1 3/4", 1 7/8", 2", 2 1/4", 2 3/8", 2 1/2", 2 5/8", 2 7/8" or 3" so please specify the size clamp needed. Polished Aluminum Tower Mirror Bracket Wide angle mirror

Claw Mirror Bracket with Mirror

$95

Orangevale, California

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

DIYWAKE CLAW WAKEBOARD TOWER MIRROR ARM AND MIRROR This auction is for one solid polished aluminum claw mirror arm and 13.5" X 6" mirror. This item is brand new and in the original manufacturers package. Get rid of that difficult windshield mounted mirror and move it up and out of the way with this quality exact fit mirror bracket and mirror. Features They come in sizes 1 7/8", 2", 2 1/4", 2 3/8" or 2 1/2" so please specify the size clamp needed. Polished Aluminum Tower Mirror Bracket For more info please call 916-337-1324

23' 2005 Yamaha AR 230

$29,990

Orangevale, California

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

Please contact owner Roy at 916-709-eight four zero zero. Boat is located in Orangevale, California. TWIN 4-STROKE ENGINES DELIVERING 280HP WITH YAMAHA ENGINE MANAGEMENT SYSTEM, DEEP-V MULTI-CHINE HULL, WAKEBOARD TOWER, FLIP-UP SEATS WITH SEATING FOR UP TO 10, AM/FM/CD, BIMINI TOP, CARPET, COAST GUARD PACK, DEPTHFINDER, FULL GAUGES, SS PROP, STORAGE, ORIGINAL OWNER. WE OFFER "SPECIAL FINANCING" FOR EVERYONE. CREDIT PROBLEMS. ....THAT'S OK. TOP DOLLAR TRADE-IN FOR YOUR CAR, TRUCK, BOAT, MOTORCYCLE, TRAVEL-TRAILER OR MOTORHOME....PAID FOR OR NOT FOR FINANCING APPLY ON-LINE AT...WWW.MINTAUTO.COM OR CALL US DIRECT AT....916-988-5000

Wakeboard Tower Bullet 5 Light bar

$229

Orangevale, California

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

www.diywake.com Now with less power consumption and more light output these new LED lights will give you 50% more light while using 75% less power. This light bar is 30" long and is made of 6061 billet aluminum. This new light bar allows you to now move each light up and down and also left to right. The bar includes two clamps and five chromed 6 Watt LED lights. The spacing of the clamps is 8" center to center. The lights can be placed all forward or all back or two forward and three back or three forward and two back. We are sorry but this unit only comes in black at this time. The lights are chrome and the clamps are polished aluminum. Features Clamp size choices are 1 5/8", 1 3/4", 1 7/8", 2", 2 1/4", 2 3/8", 2 1/2" or 3" so please specify the size clamp needed. Black 6061 billet aluminum bar Five 50 watt chromed aluminum lights

Wakeboard Tower Articulating Mirror Arm with Mirror

$145

Orangevale, California

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

DIYWAKE FULLY ARTICULATING MIRROR BRACKET AND MIRROR This auction is for one Diywake fully articulating mirror arm and 13.5" x 6" mirror. This item is brand new and in the origanal manufacturers package. It is made of solid polished aluminum. Get rid of that difficult windshield mounted mirror and move it up and out of the way with this quality exact fit mirror bracket and mirror. Features They come in sizes 1 1/2", 1 5/8", 1 3/4", 1 7/8", 2", 2 1/4", 2 3/8", 2 1/2", 2 5/8", 2 7/8" or 3" so please specify the size clamp needed. Polished Aluminum Tower Mirror Bracket Wide angle mirror

Illusion X Wakeboard Speakers Loaded with Kicker CS65's

$249

Orangevale, California

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

DIYWAKE LOADED ILLUSION X SPEAKER CAN KIT The CS-Series delivers remarkable performance and ultra-clean bass, utilizing a heavy-duty motor/magnet structure featuring EVC™ (Extended Voice Coil) technology not found in stock speakers. They use polypropylene cones with tough, ribbed, UV-treated surrounds for precise linear excursion and reliability. Lightweight, 13mm PEI-dome tweeters offer superb clarity and volume, helping each CS-Series Coaxial pair provide substantially high power handling and superior sound over factory drivers. SPECIFICATIONS Model CS65 Woofers 6-1/2”, 16cm Tweeters 3/4”, 2cm Tweeter dome Material titanium Impedance Ohms, rated ( DC resistance) 4(3.3) Power Watts (peak/RMS) 300/100 Sensitivity (dB 1w/1m) 90 Freq. Response (Hz) 35-21K Woofer Mounting Depth 1-11/16”, 4.3cm Flush Mount Tweeter Depth 1-9/16”, 4cm Crossover Point (Hz) 4k Crossover Slope (dB/Octave) 12m hi/12 lo High-freq. Attenuation Level (dB) 0, +3, +6 Grilles yes Features Polished Aluminum. Includes two Kicker KS65 Loaded speaker Cans with mounting hardware

Wakeboard Tower Razor Dual Speaker and Lightbar Combo Loaded

$499

Orangevale, California

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

DIYWAKE BULLET SPEAKERS and LED LIGHTBAR COMBO Diywake's Speaker cans are made from 1/8" thick polished aluminum and they are Loaded with Kicker CS65 speakers. The light bar is machined out of 1/2" billet aluminum and comes with three 6 Watt LED Bullet lights for 50% more light while using 75% less power. The CS-Series delivers remarkable performance and ultra-clean bass, utilizing a heavy-duty motor/magnet structure featuring EVC™ (Extended Voice Coil) technology not found in stock speakers. They use polypropylene cones with tough, ribbed, UV-treated surrounds for precise linear excursion and reliability. Lightweight, 13mm PEI-dome tweeters offer superb clarity and volume, helping each CS-Series Coaxial pair provide substantially high power handling and superior sound over factory drivers. SPEAKER SPECIFICATIONS Model CS65 Woofers 6-1/2”, 16cm Tweeters 3/4”, 2cm Tweeter dome Material titanium Impedance Ohms, rated ( DC resistance) 4(3.3) Power Watts (peak/RMS) 300/100 Sensitivity (dB 1w/1m) 90 Freq. Response (Hz) 35-21K Woofer Mounting Depth 1-11/16”, 4.3cm Flush Mount Tweeter Depth 1-9/16”, 4cm Crossover Point (Hz) 4k Crossover Slope (dB/Octave) 12m hi/12 lo High-freq. Attenuation Level (dB) 0, +3, +6 Grilles yes Tower Clamp Size Available: 1 1/2", 1 5/8", 1 3/4", 1 7/8", 2", 2 1/4", 2 3/8", 2 1/2", 2 5/8", 2 7/8" or 3" so please note the size that you need. Polished Aluminum. Includes one lightbar, three LED lights, two speaker cans loaded with Kicker CS65's, two clamps, and two binding posts.

Wakeboard Tower Quad Speaker Light Combo Loaded with Kicker CS65's

$749

Orangevale, California

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

DIYWAKE RAZOR QUAD BULLET SPEAKER LOADED WITH KICKER CS65's and SIX LED LIGHT COMBO For all towers that can not have separate speakers and light bar we have this speaker light combo setup for you. This light bar is 49 inch long and 13 inches front to back and is made of solid polished aluminum. The bar includes two clamps with the spacing of 7 1/4 inch to 8 1/2 inch center to center and six chromed 6 Watt LED lights for twice the brightness and 75% less power consumption. The speaker enclosures come loaded with Kicker CS65 series speakers. The CS-Series delivers remarkable performance and ultra-clean bass, utilizing a heavy-duty motor/magnet structure featuring EVC™ (Extended Voice Coil) technology not found in stock speakers. They use polypropylene cones with tough, ribbed, UV-treated surrounds for precise linear excursion and reliability. Lightweight, 13mm PEI-dome tweeters offer superb clarity and volume, helping each CS-Series Coaxial pair provide substantially high power handling and superior sound over factory drivers. SPEAKER SPECIFICATIONS Model CS65 Woofers 6-1/2”, 16cm Tweeters 3/4”, 2cm Tweeter dome Material titanium Impedance Ohms, rated ( DC resistance) 4(3.3) Power Watts (peak/RMS) 300/100 Sensitivity (dB 1w/1m) 90 Freq. Response (Hz) 35-21K Woofer Mounting Depth 1-11/16”, 4.3cm Flush Mount Tweeter Depth 1-9/16”, 4cm Crossover Point (Hz) 4k Crossover Slope (dB/Octave) 12m hi/12 lo High-freq. Attenuation Level (dB) 0, +3, +6 Grilles yes Features Tower Clamp Size Available: 1 1/2", 1 5/8", 1 3/4", 1 7/8", 2", 2 1/4", 2 3/8", 2 1/2", 2 5/8", 2 7/8" or 3" so please note the size that you need. Polished Aluminum. Two sets of Kicker CS65's Includes Six 6 Watt led BULLET lights, Four speaker enclosures, two clamps and four binding posts. For more info please call 916-337-1324 Thank You!

Pro Wake 2.25 Wakeboard Tower

$949

Orangevale, California

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

DIYWAKE Pro Wake Wakeboard Tower 2.25 No need to break the bank to own a first class wakeboard tower!! Constructed from 2 1/4" aluminum tubing for the legs and 2 1/2" for the top assembly, this tower features a stylish swept back design that is incredibly rigid for a stable pull behind the boat. Our Pro Wake Tower has the custom side bar design that follows the boats windshield, for a more OEM look. Our towers also have the double top cross bar that make them much more stable than some swoop towers with a single top cross bar that you see and might look good but are not stable at all! The front to back mounting points are 64 inches apart and thanks to a unique telescoping top section, this wakeboard tower can accommodate any boat between 74" and 108" in width, for a truly universal design that will fit almost any boat on the market. The same hinged sub-structure at the top of the tower is also what allows two people to quickly and easily fold this tower below windshield height for convenient storage in a standard garage. This tower fully collapses very easily and quickly and will clear a 6 foot 11 inch garage opening. This towers uses a four point mounting system per foot which is a much more stable system than the single bolt system that many of our competitors have gone to. the tower also comes with backing plates and all the mounting hardware including 1/4" rubber spacers that go between the feet and the gel coat. This tower is very simple to install. Fits boats from 74"-108" wide (No advanced measurements are needed) Fully articulating mounting feet Telescoping top section makes installation easy on any boat High quality aluminum tubing results in a strong tower that is lightweight The secure four point mounting system creates for a silent tower that will not rattle, creek or moan in rough water This tower comes in a polished finish Fully collapsible below the windshield height in under 2 minutes For more info please call 916-337-1324 Thank you!

Wakeboard Tower Razor Dual Speaker and Light Bar Combo

$399

Orangevale, California

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

DIYWAKE BULLET SPEAKER CANS and LED LIGHTBAR COMBO Diywake's speaker cans are made from 1/8" thick polished aluminum and they are made to accommodate 6 1/2" speakers. The light bar is machined out of 1/2" billet aluminum comes with three 50 watt bullet lights and the unit is 36 inches long. Why pay the high prices of other similar products when you could purchase your own speakers and save money. Features Tower Clamp Size Available: 1 1/2", 1 5/8", 1 3/4", 1 7/8", 2", 2 1/4", 2 3/8", 2 1/2", 2 5/8", 2 7/8" or 3" so please note the size that you need. Polished Aluminum. Includes one lightbar, three LED lights, two speaker cans, two clamps, and two binding posts. This package allows you to choose the speakers you want.

Wakeboard Tower Razor Quad Speaker Enclosure and 6 LED Lightbar Combo

$550

Orangevale, California

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

DIYWAKE RAZOR QUAD BULLET SPEAKER ENCLOSURE and SIX LIGHT COMBO This light bar is 49 inch long and 13 inches front to back and is made of solid polished aluminum. The bar includes two clamps and six chromed 6 Watt LED lights for twice the brightness and 75% less power consumption. The speaker enclosures are made to accommodate 6 1/2 inch speakers. The spacing of the clamps adjusts from 7 1/4 inch to 8 1/2 inch center to center. Features Tower Clamp Size Available: 1 1/2", 1 5/8", 1 3/4", 1 7/8", 2", 2 1/4", 2 3/8", 2 1/2", 2 5/8", 2 7/8" or 3" so please note the size that you need. Polished Aluminum. Includes Six 6 Watt led BULLET lights, Four speaker enclosures, two clamps and four binding posts. For more info please call 916-337-1324 Thank You!

Bullet Speakers with Kicker HLCD KM6500.2's

$900

Orangevale, California

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

DIYWAKE KICKER KM6500.2 LOADED BULLET SPEAKERS SPEAKER KIT DIY'S Tower quality polished aluminum wakeboard tower speaker cans loaded w/ Kicker KM6500.2 series The KICKER® KM6500.2 HLCD Tower Component System offers boaters and wakesports riders the ultimate musical experience as the world’s first horn-loaded, compression-driver component system. The KM6500.2 consists of two 6.5-inch, high-efficiency midrange speakers with lightweight, dual neo-magnet technology and cast-aluminum baskets with heat-sinking properties, delivering maximum sound quality. Included is a pair of 2-inch, horn-loaded compression drivers with titanium diaphragms and phase plugs coupled to 60-degree-vertical-by-90-degree-horizontal, advanced tractrix horns to help push music out to the skier, wakeboarder or wakesurfer. Integrated crossovers complete the package. KICKER KM6500.2 tower speakers are engineered with the highest design standards. They are built to fit standard 6.5-inch speaker cans, making it easy for practically any boater with an existing tower can to replace with little effort. What sets the KM6500.2 apart from the crowd are the tractrix horns, which also fits the same existing tower can with the same hole diameter and bolt pattern as the KM6500.2 midrange speakers. UV treatments on the midranges’ injection-molded cones, Santoprene® surrounds, baskets, and grilles help them to last in freshwater or saltwater environments. These speakers endure most any weather conditions with UV-resistant treatments and splash- and spray-resisting, sealed midrange motors and cones. Water-resistant, bolt-thru grilles offer added speaker protection, and all hardware is made from rustproof, 316L stainless steel. KICKER Marine Components meet or exceed industry standards for environmental humidity and corrosion* and for material degradation due to UV exposure.** Add another pair of KICKER KM6500 Midrange Speakers to your tower system, providing another weapon for those seeking the superior musical quality and extreme performance of a six-driver system. KICKER is a member of the American Boat & Yacht Council (ABYC), a leader in education for the marine industry, and the National Marine Manufacturers Association (NMMA), which supports the U.S. recreational boating industry. Woofer Size, in (mm) 6-1/2 (165) Horn-loaded Compression Driver Size, in (mm) 1.7” (43.2) compression driver, 1” (25.4) exit to True Tractrix 60x90 horn Dome Material Titanium Impedance ohms, Rated (DC Resistance) 4 Power Handling Watts, Peak (RMS) 400 (200) Sensitivity [SPLo], dB @ 1W, 1m 94.5 1 mid, 99.5 2 mids Frequency Response, Hz 50 - 22,000 Woofer Mounting Hole Diameter, in (cm) 5-11/16 (144) Woofer Mounting Depth, in (cm) 3-7/8 (99) Horn-loaded Compression Driver Mounting Hole Diameter, in (cm) 5-11/16 (144) Horn-loaded Compression Driver Mounting Depth, in (cm) 7-3/16 (183) High Pass, dB, at Frequency, Hz 18dB @ 1700Hz Low Pass, dB, at Frequency, Hz 12dB @ 1700Hz High Frequency Output Level, dB 0 or +6 Features Tower Clamp Size Available: 1 1/2", 1 5/8", 1 3/4", 1 7/8", 2", 2 1/4", 2 3/8", 2 1/2", 2 7/8" and 3" so please note the size that you need. Polished Aluminum. Includes four speakers two 6.5-inch, high-efficiency midrange speakers, 2-inch, horn-loaded compression drivers, four speaker clamps, and four binding posts. Shipping For international orders please email for a shipping quote.