Chevy 350 Engine Complete Boats for sale

1-15 of 19

Sort By

56 Chevy 210 project car

$8,500

Loreauville, Louisiana

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

Condition: Used Exterior color: RED / WHITE Interior color: Red Transmission: Manual Fule type: Gasoline Engine: 8 Drivetrain: Rear wheel Vehicle title: Clear Body type: 4 door sedan Warranty: Vehicle does NOT have an existing warranty DESCRIPTION: Up for sale is my 1956 210 sedan, The motor is a 350 crate with chrome alternator and braided hoses, with DUAL 2 bbl. Edlebrock Carbs and matching intake 3 speed in the tree and dual exhaust that has a nice throaty sound, Grant steering wheel. I bought it from and EBAY seller and decided that I want a car more complete. I love the body style! Even at the current condition, I turn a lot of heads. It is still in project phase, and I would say it is about 50-60 percent compete. but as far as drivability it drives well and straight front end in good shape undercarriage strong. Interior need work, and if I would keep it, I would add, vintage air, etc. Needs side glass and windshield. The body does need some work but does not have any major rust that I can see For additional information, reply to this ad or see: http://item.ebay.com/281440960693#ht_1980wt_912 ebmid: 281440960693

1981 Chris-Craft FLH-LTD 251 Catalina Chris Craft 350 Chevy

$4,500

Dawsonville, Georgia

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

251 Catalina Express Inventory clearance sale now underway! 1981 Chris Craft 251 Catalina Express. Powered by a V-8 Chevy 305K engine system. Equipped with a spot lite, bimini top, marine radio, galley, and full marine head. Trailer not included, but trailers are available. Just In 7.12.27 LML Our 15 acre boat yard has over 100 new trailers deeply discounted, over 250 used trailers, over 100 complete outboards, over 250 incomplete outboards for part, over 50 complete inboard outboard systems, over 150 incomplete inboard and outboard systems, literally millions of used hard to find parts. Plus over 13,000 new parts, hard to find and no longer available. Additionally 350 complete boats and 350 project boats all in one location. Largest inventory in the southeast. LML

1988 Slickcraft 237SC cuddy cabin 7.4 liter 350HP with trailer

$4,900

Randolph, New Jersey

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

1988 Slickcraft 237SC cuddy cabin boat with trailer (made by Tiara Yachts). Mercruiser powertrain. 454 (7.4L) Chevy engine, replaced a few years ago with a complete Promar 350HP reman. About 70hrs on engine. Bravo outdrive, 80 gallon fuel tank, trim tabs, dual batteries. Cuddy cabin with 2 seats, porta potty, Sony stereo with 4 speakers and subwoofer. Custom cover. Molded swim platform, curved windshield (this boat was ahead of it's time!) New water pump, oil just changed. Turn key, ready to drop in the water! 1992 Loadrite trailer with surge brakes. Used in Lake Hopatcong. Great boat! Email any questions. Cash only. *boat for sale locally, auction may end early*

27' Proline Walk Around Cuddy Cabin 251 Offshore Fishing Boat with trailer

$12,500

Seffner, Florida

Year 1996

Make Proline

Model 251

Category Cuddy Cabin Boats

Length 27.0

Posted Over 1 Month

1996 Pro Line 25127' 4" with pulpit. 30'+ with dive platform. 8' 6" beamMercruiser 5.7 Liter 350 Chevy (250hp) with Bravo III outdrive both in great condition, engine replaced with complete new engine a few years ago (new exhaust included), 175 gallon fuel tank (approx. 150 gallons included in the sale), Hummingbird Color GPS/Plotter/Side Scan Sonar, Raymarine VHF, Alpine stereo/CD player, refrigerator (12 volt/110 volt), marine head, fresh water in cabin sinks, transom sink, and fresh water wash down, salt water wash down, forward livewell, transom livewell, insulated fish boxes with macerator pump, full cockpit curtains (not shown in pictures), second bimini top that covers the entire rear cockpit (not shown) in OK condition with a few small rips, seats that mount on either side of the engine box for cruising (not shown), new large sand anchor, Bennett trim tabs.Speed: 32 mph at WOT, 26-27 mph at 3800 rpm, 21 mph at 3200 rpm. Will hang on plane at very low speeds with trim tabs down.Trailer Included: 2007 TNT aluminum trailer custom built for this boat. Needs bunk carpet soon, but in good street worthy condition. Brakes not hooked up.Kicker bracket (kicker is 6hp Tohatsu 4 stroke-not running due to sitting for a long time) Boat is 4200 pounds dry. Fuel adds 1200 pounds, trailer is 1100 pounds. You will need a full size truck or van to pull it. I am glad to run the engine on the hose and show you that the drive shifts properly, etc. However, due to time constraints, I will not offer to water test the boat with you. You are welcome to have your mechanic come and inspect it and do any testing, but the boat will only leave my property after it is sold and paid for in full. Please keep this in mind when bidding.

SHAMROCK - MACKINAW / PILOT HOUSE / STRAIGHT INBOARD - OPTIONAL TRAILER

$15,000

Bethpage, New York

Year 1989

Make Shamrock

Model MACKINAW

Category -

Length 26.0

Posted Over 1 Month

You are bidding on a near mint 1989 26’ Shamrock Mackanaw Hart top Express type fishing boat. It has a Loa of almost 29 feet Shamrock Marine boats are one of the most high end, high quality made fishing boats ever made. The craftsmanship and structural integrity of this boat is mind blowing. A true offshore fishing machine with all the amenities you can ask for. The patented Keel Drive Design performs extremely well in offshore conditions and is very economical to run. Shamrock quality can easily be compared to names like Bertram, Rampage, Albemarle, Blackfin, Fountain, Contender, Pursuit and Boston Whaler. Shamrocks were hand made and hand laid by skilled craftsman using the highest quality materials. NOT LIKE the mass produced production line fishing boats like Grady White, Mako, Aquasport, Proline, Bayliner, Trophy and the like. Very few Pilot House hulls are available to choose from that have quality structural integrity besides the Shamrock, Parker s, May Craft s and Steiger s COMPLETE DESCRIPTION DRIVETRAIN - Powered by a Single Chevy V-8 350 pushing 250 horsepower. The motor starts right up and runs smooth at any rpm and pumps tons of water. The oil pressure is excellent and the motor runs cool as well. The engine is mated to a Borg Warner Velvet Drive straight inboard transmission that shifts smooth and quiet in both forward and reverse. The running gear including prop is in great condition and operates vibration free. The huge solid bronze rudder is in great shape and issue free. Extra spare prop in mint shape is also included. KEEL DRIVE - Shamrock Boats are made with their patented keel drive system. It’s a fully fiberglass encapsulated keel that completely protects the propeller, adds tremendous stability to the boat giving is a very smooth ride under offshore conditions, it increases fuel economy and adds stability by lowering side to rocking when you are shut down fishing. The bottom of the Keel is reinforced and protected with a solid ¼” built in strip of bronze that protects the keel from any scrapping and is extended to protect the propeller as well. On the bow of the boat at the water line is also protective bronze metal to add protection to the hull from any objects you may hit in the water. LINK TO MORE INFO ON THE BENEFITS OF SHAMROCKS KEEL DRIVE SYSTEM http://www.shamrockboats.com/content.php?p=shamrock_advantages/keel_drive_advantage.html FUEL ECONONMY - This boat is Extremely economical to run. At a mellow cruise of about 20 knots it burns about 5 gallons per hour and gives you about 4 Mpg. If you bring it up to a 24kt cruise you’re still getting 3 + Mpg, depending on sea conditions of course. This is unheard of fuel economy compared to most outboard and inboard outboard boats FUEL AND FUEL MANAGMENT – Factory rigged with 2 separate 50 gallon fuel tanks located on one each side center to rear mid-ship. The tanks are leak free and were factory made from Aluminum and then barrier coated to add protection from the elements. You can run on both tanks or one depending on your preference. Each tank has its own high end Racor fuel filtration system with drain bowl. There is also additional inline filtration before the fuel reaches the carburetion. SAFETY - There are also 2 fire extinguishers included with the vessel, a life throw ring, distress flags, Flares and flare gun (flares are expired and will need replacement), life jackets, etc . STRUCTURAL INTEGRITY – THE STUCTURAL INTEGRITY OF THIS BOAT IS MINDBLOWING. FROM THE ROCK SOLID HUGE STRINGERS TO FULL FIBERGLASS ENCAPULATED KEEL. EVERYTHING IS ROCK SOLID AND IN GREAT CONDITION INCUDING ALL AREAS OF THE FIBERGLASS NON-SKID SOLID FIBERGLASS FLOORS AND HATCHES. THERE ARE NO SOFT SPOTS ANYWHERE. THIS BOAT WAS EXTREMELY WELL MADE AND OVERBUILT. THERE IS NO WOOD CORING TO ROT OUT AND CAUSE ISSUES. HULL – THE HULL HAS KNICKS, DINGS AND SCRATCHES BUT ITS A FISHING BOAT. THERE IS NO EVIDENCE OF ANY MAJOR REPAIRS FROM ACCIDENTS ANYWHERE ON THE TOPSIDE OR BOTTOM. THE BOAT IS IN GREAT STRUCTURAL SHAPE. A GOOD CLEANING AND WAXING COULD MAKE IT LOOK VEN BETTER. BOTTOM - The bottom is in nice structural condition with no sign of any hits or repairs that were ever made. RUBRAIL- The heavy duty rubrail is in nice shape ALSO COMES WITH FOLDABLE TOWER AND TOP - NOT INSTALLED OR SHOWN IN PICTURES ROD STORAGE- There are built in rod storage holders located in the cabin. Six rod storage holders located under the port and starboard gunnels. Topside there are 4 built in Stainless Steel Rod holders. COCKPIT- The cockpit is huge with plenty of room for fishing. Personally I would add 2 nice wise fishing / deck chairs with gimbals for a few hundred dollars. THERE IS A REAR REMOVABLE TRANSOM DOOR TO PULL YOUR FISH IN EASILY. WITH THE REAR CONTROL STATION ITS VERY EASY TO MAN THE BOAT SINGLE HANDEDLY AND CATCH THAT MONSTER FISH. TOP / RADAR ARCH/ ROCKET LAUNCHERS- The factory installed integrated aluminum radar arch / top enclosure with 4 built in rocket launchers is overly built and in great condition. All the welds are tight and everything is secured tightly to the decks STEERING / CONTROLS / CABLES - The steering is smooth, tight and operates the rudder properly. The Morse throttle and shift controls and control cables work properly and operate smoothly from the front station. STEERING / CONTROLS / CABLES – REAR STATION The Rear station will need new control cables and steering cable installed. I have the parts just haven’t had a chance to install them 12 VOLT POWER – The boat is rigged with 2 batteries controlled by a battery selector switch. There is also an onboard battery charger system as well. MISC MECHANICAL- The trim tab motor, switches and tabs themselves works perfectly. There are 2 bilge pumps both with float switches and operate properly. The blower motor works great. The windshield wiper motor works great but it could use new wiper blades. All these items operate properly from their intended switches. GUAGES - The helm comes equipped with a full set of gauges including built in sea water temperature gauge, Volts / charging gauge (charges properly), Temperature (engine runs cool), Tachometer (operates properly), Oil Pressure (excellent), GPH gauge and clock. The gauges are back lit for night usage. Nice built in compass... SWITCHES - Every single switch operates as it should. RAILS / CLEATS / GRAB BARS - All the stainless steel rails, cleats, grab bars and mounted very strongly. The stainless rails are in great shape with no loose rails or bends anywhere. The Stainless cleats are in great shape, strategically placed and solid as rock secured. DECKS AND HATCHES- There is not one soft spot anywhere on any topside deck or the main deck. All the hatches are made of solid fiberglass (no wood core to rot out and aver cause problems).Almost every square inch of every deck is factory made with non-skid to ensure proper footing at all times. The decks are self bailing as well. WINDSHIELD - The Windshield is in excellent condition. All the glass is crack free. The aluminum is in nice shape and with some metal polish would come out amazing, The front and passenger side front lower windshield sections open up for ventilation (one locking knob is missing a $5 part in marine store) WINDOWS AND CABIN HATCH - Inside the Cabin the main hatch is made from solid fiberglass is leak and issue free. There are also 2 opening porthole hatches in the cabin that are leak and issue free. CABIN - The cabin is in decent nice shape. I have brand new cushions being fabricated. The V-Berth is a very good size and with the Insert and additional Cushion it’s a huge amount of sleeping room. The headliner could use a cleaning and a little adhesive but other than that the cabin is very nice with all the teak wood... With some teak oil the cabin would look amazing. The cabin structure is all molded fiberglass including the cabin floor. BATHROOM - The bathroom is located on the left side of the cabin. It is completely enclosed for privacy. EASY ACCESS -This boat was designed for easy access to work on or maintain any and all ships systems. The engine itself can be assessed from either the forward engine hatch or a rear hatch. Transmission and packing shaft can be easily obtained. The rear rudder and steering control systems are accessed from a rear hatch. All decks are screwed down incase you ever needed to access any of the systems. There is also a built in Hose fitting so the engine can be very easily run off a hose, makes it very simple to winterize the engine with non tax and flush out the system. THROUGH HULLS PENETRATIONS- There are 5 through hulls located in the boat. The First being the water intake which has a brass pick up strainer (in mint shape corrosion free and has new zinc) The intake leads a inline manual shut off (works perfectly) then to a large southbay strainer with removable strainer and then feeds into the heat exchanger and cools the antifreeze which cools the engine in the fresh water cooling system. The Second through hull is for the salt water washdown intake which provides salt water for the live well and the salt water wash down spicket under the gunnel... This though hull contains an inline manual shut off valve that operates smoothly and properly. The Third re is a high end built in transducer which is properly installed, secured and leak free. The Fourth is where the Stainless Steel Shaft comes though the stuffing / packing box into the transmission. The stuffing box is in great shape and issue free. The Fifth is where the rudder penetrates the hull to meet the Hydraulic steering arm. This area functions properly and is issue free as well HOSES All the hoses throughout the boat are in great shape and issue free STORAGE - There is tons of storage throughout the boat. Under the V-berth are hatches with access to large individual storage compartments. Plenty of Rod storage with built in rod holders in the cabin and under the gunnels. There are 5 Tackle storage drawers and 4 long Teak shelving compartments and 2 built in deck storage or fish boxes ELECTRONICS - The only electronics that is included with the boat are 2 built in VHF Radios. Everything is pre-wired for depth finder (built in transducer), Radar unit and GPS are not included but it is all pre-wired including Raytheon Radar antenna and GPS antenna. Richie Powerdamp Compass. Optional new Lowrance Elitie 5 GPS Plotter / Fish finder to be installed upon request for the right deal MISC ITEMS INCLUDED 1) Life Jackets, Bumpers, Dock lines, Etc Bottom Line- Spend a little time finishing it up cosmetically if you choose OR - Turn the Key and go fishing on one of the most stable offshore fishing platforms you can buy TRAILER. There is no trailer included in this auction however the 48 roller galvanized trailer with torsion axels and decent tires in the pictures which fits the boat very well is available for an additional $2,000. . CONCLUSION I HAVE DESCRIBED THIS BOAT TO THE BEST OF MY ABILITY BASED ON MY OBESERVATIONS AND USE OF THIS VESSEL. YOU ARE WELCOME TO MAKE AN APPOINTMENT TO COME SEE THE BOAT FOR YOURSELF DURING THE AUCTION. I STAND BY MY DESCRIPTION 100%. IF YOU COME SEE THE BOAT WITHIN 7 DAYS OF THE END OF THE AUCTION AND THERE IS ONE WORD THAT IS INACCURATE IN THE DESCRIPTION I WILL RETURN YOUR DEPOSIT NO QUESTIONS ASKED. JUST AS YOU EXPECT BE TO HOLD UP MYEND I EXPECT YOU TO HLD UP YOURS AND FOLLOW THROUGH WITH THE PURCHASE OF THE BOAT. IF YOU ARE UNSURE OF ANYTHING PLEASE ASK FIRST TERMS 500 immediate deposit due at the end of the Auction through papal. The balance is due in 7 days by either cash or on pick up or you can send a personal check in advance as long as it clears before pick up. The buyer has 21 days to remove the boat at their expense. After 21 days the boat will be moved into long term storage for $150 per month. The boat can be kept there for as many moths as you need to work out the transport logistics. I will assist with your transporter in anyway I can. A friend of mine is a local transporter who delivers in the tri-state area only. I can get you a quote if you like. Clean NYS title for the boat that will be given to the new owner once the boat is paid in full and picked up. The boat is being sold as is with no warranties or guarantees. Good luck with the auction SOME MORE LINKS TO INFO ON SHAMROCKS SHAMROCK ADVANTAGES http://www.shamrockboats.com/content.php?p=shamrock_advantages/index.html KEEL DRIVE INFO http://www.shamrockboats.com/content.php?p=shamrock_advantages/keel_drive_advantage.html FISHING ADVANTAGES http://www.shamrockboats.com/content.php?p=shamrock_advantages/fishing_amenities.html A LITTLE MORE SHAMROCK INFO. All Shamrock hulls decks and component parts were hand-laid using rolled fiberglass materials and resin. The hull is molded in two halves and, depending on the deck and cabin configuration, an additional 15 to 20 individual molds are used to create the parts necessary for the completed vessel. This allows for removable components that provide easy access for replacement of machinery and tanks. It’s a more expensive way to build boats but the result can often save hundreds, if not thousands, of dollars when repairs become necessary. When the two halves of the hull are joined, the keel is filled with a mixture of resin, sand and glass fiber resulting in a rock-solid appendage able to withstand substantial impact. The full length keel adds stability and protects the running gear. This carefully, hand crafted construction added several hundred hours of construction time to each boat Fuel tank is coated with a zinc chromate primer to help prevent corrosion from exposure to bilge water and marine quality stainless steel and bronze fittings and fastenings are used throughout. Shamrock boats are powered by direct-drive inboard engines rather than fuel burning and less efficient outboard and inboard/outdrive power options offered by other manufacturers of boats in this size range. The inboard engine is mounted near the center of the boat for better weight distribution and they are mounted lower in the hull for a lower center of gravity. This leads to greater stability and better handling characteristics such as predictable motion, good lateral and tracking stability and full-length keel that helps dampen roll whether trolling or at rest.

35' Chris Craft 302 Crowne Cruiser for Sale with 16Ton HydroHoist included

$49,995

Las Vegas, Nevada

Year 2001

Make Chris Craft

Model Crowne 302

Category -

Length 35.0

Posted Over 1 Month

Galley EquipmentNew Refrigerator, Microwave, Stove, Sink, Hot & Cold Water, Mood Lighting, Cabinets, Table, 27" Flat Screen TV, DVD Player, WiFi 'N' Router, New Mermaid 16 Ton HVAC, Wet Bar & 2nd Sink, New Jabsco Lite Flush Electric Toilet, New Bilge Pumps, (Front, Aft, Shower), New Fresh Water PumpMechanical EquipmentTwin 5.7 260 HP OMC (Chevy) engines I/O Drives - Both engines have been totally Overhauled, (Heads, pistons, manifolds, fuel pumps, Edelbrock Carburetors, Distributors), New Tilt Pump, Power steering, Trim Tabs, New Stern Drive, one rebuilt & overhauled stern drive, New dual Throttles and Cables, Onan 4.5 KVA AC Generator, Maxwell Freedom Windlass Anchor Winch, New Rope & Anchor Chain, New Remote Operated Bow Search Light, New Electronic Bow Horn, New Navigations lightsAccommodationsSleeps 6 with Separate Master & Guest quarters. Full Kitchen, Refrigerator, Microwave, Burner, Sink, Electric Head & Shower, Hot & Cold Water, 16 Ton HVAC, Large Dinette Table, 110V 30 AMP shore connector, 6'8" Headroom, L-Shaped dinette sofa-seats 4, Hanging locker, U-Shaped couch with table in rear that seats 8, Standard Head with Shower & Vanity, Mood Lighting. Generator to supply 110V,Electrical SystemRitchie EM Compass, New Standard Horizon Marine Explorer Radio with GPS Position and Emergency Distress, New Lowrance HDS Gen 2 Range & Depth Finder with GPS, Speed and map trails, Lowrance Depth Finder, 27" Flat Screen TV with DCD Player & Wifi 'N' Router, New AM/FM/CD/USB/Bluetooth/Pandora Stereo system with new speakers, Full Electronics Fuse Panel (AC & DC) & DC Fuel Panel by Captain's Seat, Full Switch Panel, 3 Windshield WashersDeck & Hull EquipmentNew Bimini Tops Canvas(Front & Aft) including the Stainless Steels Rod and Hardware. New Canvas boat Cover. New Vinyl covers for all seats, Swim Platform & Built-in Ladder, New Bottom PainAdditional Equipment110V 30 AMP Shore power, 3 Circular deck Hatches, Hydro Hoist (16 Ton 2 Blower, 2 valve, 3 Pontoon), 14 Life Preservers, 3 Seat cushions, Time & Temperature Clock, Rear Aft Deck Hot & Cold Water Shower, Double helm and companion seatElectronics & Navigational GearRitchie EM Compass, New Standard Horizon Marine Explorer Radio with GPS Position and Emergency Distress, New Lowrance HDS Gen 2 Range & Depth Finder with GPS, Speed and map trails, Lowrance Depth Finder, 27" Flat Screen TV with DCD Player & Wifi 'N' Router, New Search Light Measurements Speed and DistanceCruising Speed26Max Speed33DimensionsNominal Length35Length Overall36TanksFresh Water Tank Capacity40Holding Tank Capacity30 Propulsion Engine ModelTwin Cobra 5.7LTREngine TypeTWIN I/OFuel TypeGAS While this is a 1991 Chris-Craft 302/Crowne, It looks and feels like a 2012. This Sleek Racy FRESH WATER boat was totally rebuilt in 2012, stem to stern and had been meticulously maintained. Everything is new (See list of equipment). This Boat looks better, runs better than most other boats in its class. IT HAS NEVER SEEN SALT WATER. The is no rust, corrosion, or salt damage. Just look at the reflection in the Fiberglass photos. Like a New Boat! Powered by Twin 5.7 OMC Cobra Engines (Chevy 350 with less than 50 hours on them since rebuilt), its runs a smooth 30 MPH all day long. Boat comes complete with Full Manuals & documented Repairs. This boat can be trailered anywhere in the USA. It's the perfect size for the lake, gulf or ocean. If you love boats, this one's for you! Economical, easy to maintain, easy to pilot, great for friends and family, all the comforts of home. The boat is docked at Lake Mead Marina in Boulder City (Las Vegas) Nevada and sits out of the water on a 16 Ton (3 Pontoon) Hydro-hoist, which is included in the sale price. To purchase a comparable boat today would run you in excess of $250,000. But I'm selling mine for $49,995, which INCLUDES the HYDROHOIST! If you don't take a serious look at this boat, you're gonna miss out and be very disappointed. You can't find a better boat!

28.5 foot BAYLINER Boat, Contessa Series, 2850 Sunbridge, Immaculate

$13,999

Redondo Beach, California

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

========================== 28.5 foot Bayliner Power Yacht, Contessa 2850 model, 1987 year. Immaculate like new condition. Fits into an inexpensive and standard 30 foot boat dock slip. This is the perfect first boat for someone looking for an ocean going boat to keep in a marina for Catalina Island outings, or fishing trips. This yacht is Catalina ready today, and is the finest condition one on the Southern California market, only reason for selling is purchase of a larger 35 foot boat. Marine Volvo Penta 280 / Chevy 350 engine, with 120 gallon fuel tank. The engine is fresh water cooled. Very recent complete engine rebuild, only 120 hours, engine rebuild was over $8,000 alone Recent complete haul out and fresh bottom paint, which cost $900. 3 brand new batteries, new electric anchor windlass, new rear swim step with stainless steel ladder. See the detail photos of these. New canopy and rear deck enclosure cover, made of double layer canvas, at a cost of $3,500 Interior is in excellent condition, and the interior amenities include: Kitchen with dual stove, double sink, hot water heater, built-in factory refrigerator, microwave, and television. Enclosed bathroom with door, which includes shower, bathroom sink, toilet, and cabinets. Queen size bed within the master bedroom. Master bedroom has full door, and dresser drawer cabinet Price is $13,999 - Firm Price, no offers Private party selling, so please serious inquiries only. NO dealers, brokers, consignments, and NO TRADES. Available are resources to deliver to the So. Cal marina (Los Angeles) of your choice for a small fee, to be arranged with a certified boat captain. Also can refer you to a licensed professional boat hauler with a 5th wheel truck and trailer for ground transport. ==========================

LUHRS 32 Sedan Cabin Cruiser Fly Bridge Fishing Power Boat Project MD

$5,950

Washington, District Of Columbia

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

1970 LUHRS 32' long 12' wide TRUE CLASSIC Sedan Cabin Cruiser Dual Station with Fly Bridge GREAT Fishing Boat Located Zip 20624 Maryland MUST SELL due to family illness. sleeps 6 CLASSIC BEAUTY INSIDE PROJECT CONDITION: Engines Removed but have them, much work done. HAS RECENT BOTTOM PAINT and couild be set in water as it is now.. Needs upper structure painted, misc. Engine compartment has bee THOROUGHLY CLEANED and ready for power installation. PROJECT: 318 Chrysler Engines Removed, have original engines, need rebuilt or replaced and everything that I have that I removed will be included in the asking price. I had planned on putting later model 350 270HP Chevy Engines in and have nearly everything (INCLUDING ONE RUNNING READY TO GO COMPLETE UNIT) to do that, but that gear is not included in this price. Have many other parts paint and supplies to finish refurbish. MAKE OFFER but please include your phone for text / call so we can go over it clearly. Located zip 20624, cost aprox 4-600 to have moved to Annapolis Baltimore or Northern Virginia, please check on this yourself as I'm not moving it so I DO NOT KNOW HOW much to move... Thanks for understanding and looking.

1970 LUHRS 32 Sedan Cabin Cruiser Fly Bridge House Sport Fishing Power Boat MD

$6,250

Clements, Maryland

Year 1970

Make Luhrs

Model Sportfisher

Category Sport Fishing Boats

Length 32.0

Posted Over 1 Month

sgrugg Store 1970 LUHRS 32' long 12' wide TRUE CLASSIC Sedan Cabin Cruiser Dual Station with Fly Bridge GREAT Fishing Boat Located Zip 20624 Maryland MUST SELL due to family illness. sleeps 6 CLASSIC BEAUTY INSIDE PROJECT CONDITION: Engines Removed but have them, much work done. HAS RECENT BOTTOM PAINT and couild be set in water as it is now.. Needs upper structure painted, misc. Engine compartment has bee THOROUGHLY CLEANED and ready for power installation. PROJECT: 318 Chrysler Engines Removed, have original engines, need rebuilt or replaced and everything that I have that I removed will be included in the asking price. I had planned on putting later model 350 270HP Chevy Engines in and have nearly everything (INCLUDING ONE RUNNING READY TO GO COMPLETE UNIT) to do that, but that gear is not included in this price. Have many other parts paint and supplies to finish refurbish. MAKE OFFER but please include your phone for text / call so we can go over it clearly. Located zip 20624, cost aprox 4-600 to have moved to Annapolis Baltimore or Northern Virginia, please check on this yourself as I'm not moving it so I DO NOT KNOW HOW much to move... Thanks for understanding and looking.

Chris Craft XK22, Classic Glass Boat, Completely Redone- Collector's Boat, Rare!

$24,000

Mound, Minnesota

Year 1975

Make Chris Craft

Model XK22

Category -

Length 22.0

Posted Over 1 Month

Hi, you’re looking at a 1975 Chris Craft XK 22. The XK 22 is one of only 220 boats ever made, from 1971 to 1975. They are becoming increasingly rare and collectible. In the past year I've seen a few $45,000 asking prices! It is a ruggedly built boat and will handle almost any waters you’d put her in. She is 22’9” long and 7’8” beam, weighing 3300 pounds. The XK’s were originally designed by famed offshore racing champion, Jim Wynne. Jim patented the lifting strake and designed several of the fiberglass boats for Chris Craft at the time they were moving into glass boats from wood. Dick Avery designed the interior and the look of the boat. Dick was recruited to Chris Craft in the ‘60’s from Ford in Detroit. He was on the original design team of the Ford Mustang. So the boat has that “Muscle Car” feel to it and frankly, there has not been another one like her on the water. My XK 22 has gone through a complete renovation. I had the boat completely stripped down and painted. Any fiberglass “dings” were expertly repaired. The boat was primed and painted with AwlGrip paint. A new stainless steel rub rail was installed at the same time. New upholstery (front seats) were done. Mechanically, there is a brand new rebuilt Chevy 5.7 or 350 CI marine engine. There are currently about 5 hours on it. A new 4 barrel Edelbrock carb was installed, as was a new starter, dual batteries with switch, trim pump, fuel system completely serviced, new shifting mechanism and the list goes on and on. There is a full sun pad on the rear and a beautiful teak swim platform with stainless steel ladder. The Volvo outdrive works like a charm and has full tilt/trim. The boat has new shag carpeting, that’s right, shag! The boat was delivered with shag carpeting in the 1970’s (remember the Shag Revolution?) I've had the boat on Lake Minnetonka, outside of Minneapolis. No one can believe she's a classic boat from the '70's--she's a real head-turner for sure. If you're interested you probably want to hear more or speak with me directly. If you send me a message here on ebay I will respond. I also have a great video link: Own a piece of history that you can enjoy! Contact me with any questions. Included in the sale is a trailer with tandem axles.

$9,250

Texarkana, Texas

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

1981 Sea Ray 260 26.3ft..chevy 5.7 litre engine 350 with alpha one mercruiser inboard outboard motor.. outdrive completly redone... 700hrs... everything works... head ...vacuflush... nice radio.. stove..fridge...cooler... sleeps 4...mechanically and cosmetically sound. It has a Bimini Top(Does need repairs), Depth Sounder, Inverter, Stero-AM/FM CD with 4 speakers, Bar/Console, Refrigerator, Dual Batteries With Switch, Cavitation Plates/Adfustable, Silent Exhaust, Single Hydaulic Steering, Stainless 3-blade Propeller, Fiberglass Swimdeck, & Shower. Comes complete with a Solid Alumin Classic tri axle trailer bought new in 2006 that can fit up to a 34 ft boat..$1194.00 completly serviced and detailed in 2012 and 2014 completly buffed and wheeled out... boat is in excellent condition and is ready for the water for summer fun!... Super clean and in excellent condition..Very nice and clean boat! Many Many extras!! NADA Suggested Low Retail is 11,350.00..NO Disappointments... Any questions or for pics feel free to call me.

22' 1982 Sea Ray 225 Express Cruiser

$7,900

Sheffield Lake, Ohio

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

Please contact boat owner Jim at 440-752-1152. Boat is located in Sheffield Lake, OH. Excellent condition. 22 ½ foot with a Single Mercruiser 260 IO 350 Cubic Inch Chevy V8 Dual Batteries, 75 Gallon Fuel, 20 Gallon Fresh Water, New Garmin GPS, FishDepth Finder, New Marine Radio, New Tachometer. Cuddy Cabin with Galley which has a sink, 2-burner stove and ice box, enclosed private head no shower, just toilet with outside pump-out drain, Dinette Table that converts to Sleep Area. AM/FM/CD/AUX with 6 speakers. Newer Upholstery and adequate lighting throughout cabin, head and deck. Full swim platform. Full Camper Enclosure. Bow Pulpit with Dash Controlled Flood/Spot Light. Deck area seats 7 comfortably and can sleep 3 with the seats easily converted. Bennett Trim Tabs and trim-able out drive. The lower outdrive unit was recently replaced. Recent engine and mechanical work done by a Dealer includes the following new items: fuel pump, fuel filter, carburetor, water separator filter, electronic distributor, plugs, plug wires, all fuel lines, coil, alternator, belts, exhaust gasket, Gimbal Bearing, Complete Bellows Job with Shift Cable, out drive water pump and impeller. Outdrive lift pump and Trim Tab cylinders were rebuilt last year. All dash gauges work and the ignition switch was just replaced. Last year the hull seam was resealed to ensure the watertight integrity of the interior. The boat comes with all Coastguard required safety equipment, life jackets, two anchors spare prop and water skis. Included is a 1989 Load-Rite dual axle trailer with new brake master cylinder and a 4500 pound winch with its own battery on the trailer. The boat loads onto the trailer with the push of a button.

1978 SeaBird 23 Offshore Cuddy OMC 800

$2,550

Dawsonville, Georgia

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

Bertram Factory Built Cuddy Better hurry! Recycling begins in September. Inventory clearance sale now underway! 23' Seabird Cuddy Cabin Soild Deep V Hull with a V8 Chevy 350 260 HP Engine. Trailer available. LML 9.29.12 .................. Our 15 acre boat yard has over 100 new trailers deeply discounted, over 250 used trailers, over 100 complete outboards, over 250 incomplete outboards for part, over 50 complete inboard outboard systems, over 150 incomplete inboard and outboard systems, literally millions of used hard to find parts. Plus over 13,000 new parts, no longer available hard to find. Additionally 350 complete boats and 350 project boats all in one location. Largest inventory in the southeast. LML

1970 Stamas v21 Apollo Offshore Cuddy Volvo 230 280 outdrive

$350

Dawsonville, Georgia

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

Parts Boat or Project boat Better hurry! Recycling begins in September.Parts Boat or Project boat. v-8 volvo powered offshore cuddy that has been cut open to provide for more fishing space. The price is for the boat hull only. The 350 chevy volvo v-8 is available for an additinal charge or it is available for parts. The Volvo 280 drive is also available for an additional charge. Parts are available from the boat or volvo system. The trailer is available. LML 9.11.12 ............ This inboard/outboard day cruiser is 21.25 feet long and weighs 1850 (pounds dry). This weight does not account for passengers, fuel, or gear. The beam of this craft is 93 inches. The max horsepower for this boat on our records is 280 hp . If you choose to buy a replacement engine for your V-21 Apollo boat, it is recommended by many, that you verify the max horsepower for your boat. This is because of safety reasons - as it would effect the insurability of your inboard outboard boat. Be sure to have the manual for your engine handy, not only for your safety, but to save you money on repair costs. Your fiberglass hulled boat can be kept in better condition by covering it properly when not in use. This will help to prolong its use and resale value. Proper maintenance and care (and winterization if needed) will also help maintain the usability and value of the craft. As outboard engine life also effects the value of a boat, we have included engine information as well. Information on this page is provided to you as a free service of iboats.com. Because this information has come from many sources we can not guarantee its accuracy. Even if this information is the same as the original factory specs, boats are sometimes modified. Thus, for safety and other reasons, it is a good idea to verify information here to make sure it matches up with your boat. For additional information, we recommend the iboats forums and a boating safety course. Our 15 acre boat yard has over 100 new trailers deeply discounted, over 250 used trailers, over 100 complete outboards, over 250 incomplete outboards for part, over 50 complete inboard outboard systems, over 150 incomplete inboard and outboard systems, literally millions of used hard to find parts. Plus over 13,000 new parts, no longer available hard to find. Additionally 350 complete boats and 350 project boats all in one location. Largest inventory in the southeast. LML 10/7/10.

22' 2001 Supra Sunsport

$22,000

Wellington, Nevada

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

Please contact the owner directly @ 775-465-1324 or [email removed]...2001 Supra Sunsport w/ tower and ballast tanks. A very clean, low hours, stored inside, wakeboard/ski boat and 2-axle trailer. This boat has only 271 hours on a Indmar Marine Chevy 350ci/220hp engine. Lots of storage and seating for up to eleven people. This boat has a detachable 2', teak swim step. Included are skis, ski vests, a wakeboard, all required safety equipment/vests, 3 extra props, and other items. There is lots of on-board storage behind the rear seat, behind and under the front passenger seat, and under the open-bow seats. This boat also has a bimini top and a complete boat cover. Tires are new and ready to go to your favorite lake. This boat has never been in salt-water. The trailer has 4-wheel brakes and a pivoting tongue folds to the side making is shorter for garage storage. Also, the tower pivots forward allowing the boat to go in a garage door 9'w x 7'h. This boat is located in Wellington, NV and serious buyers will be able to test drive this boat in Topaz Lake.