Glastron Project Boat Boats for sale

1-14 of 14

Sort By

1971 GLASTRON GT 160

1971 GLASTRON GT 160

$1,200

East Falmouth, Massachusetts

Year 1971

Make GLASTRON

Model GT 160

Category Bowrider Boats

Length 16.0

Posted Over 1 Month

FOR SALE IS A 1971 GALSTRON GT 160 SPEED BOAT.ORIGINAL GELL COAT IN GOOD SHAPE.NEEDS A GOOD BUFF JOB.70HP EVENRUDE OUTBOARD ENGINE RAN WHEN STORED .GOOG GALVANIZED TRAILER WITH GOOD TIRES INCLUDED.NEEDS INTERIOR WORK.OLD AS IS /RESTORATION PROJECT.TRAILER IS IN GOOD SHAPE AND ROAD WORTHY.

1974 Glastron V-162 Futura

1974 Glastron V-162 Futura

$1,195

Stuart, Florida

Year 1974

Make Glastron

Model V-162 Futura

Category Bowrider Boats

Length 15'

Posted Over 1 Month

1974 Glastron V-162 Futura Single 55 hp Suzuki outboard engine runs and last ran on 8/16.  Engine year is approximately 1989.  Hull condition is good.  Deck condition is needs repair - needs a new cockpit floor.  Does come with a single axle trailer that is good condition.  Compression readings 115 and up on all three cylinders.  This is a great project for a teenager!  What a great first boat this would make.

1972  Glastron  150 Bowrider Tri Hull

1972 Glastron 150 Bowrider Tri Hull

$150

Dawsonville, Georgia

Year 1972

Make Glastron

Model 150 Bowrider Tri Hull

Category -

Length -

Posted Over 1 Month

Power it with a trolling motor or outboard. Rig this for any type fishing you desire. Visit us online at www.LanierMarine.com LML 10/9/10. We have the largest inventory in the southeast. Additionally 350 complete boats and 350 project boats all in one location. Plus we have over 13000 new partsno longer available hard to find. Boat only $150. Our 15 acre boat yard has over 100 new trailers deeply discounted over 250 used trailers over 100 complete outboards over 250 incomplete outboards for partsover 50 complete inboard outboard systems over 150 incomplete inboard and outboard systems for parts literally millions of used hard to find parts. BC Boats Bowrider 3441 PSN . 1972 Glastron 150 Bowrider Tri Hull Project boat Better hurry! Recycling begins in September...

GLATRSON GS249

GLATRSON GS249

$12,500

Long Beach, California

Year 2000

Make Glastron

Model GS249

Category -

Length 25.0

Posted Over 1 Month

2000 Glastron GS249 Cruiser, partially restored. The boat is in good shape and many things have been replaced and restored. It has a strong 5.7l Volvo Penta engine with a dual prop and plenty of power. Boat is powerful enough to pull a wake or inflatables and comfortable enough for cruising around the bay. It has new audio, new upholstery, new batteries upgraded trailer hitch and many other things but it still needs a little TLC to get it to its full potential. Interior could use a cleaning and a hatch window is cracked other than that the boat is in great condition. Expecting our first born baby any time now and wife says my project needs to go.

1981 Glastron Carlson C-500

1981 Glastron Carlson C-500

$450

Miami, Florida

Year 1981

Make Glastron

Model Carlson C-500

Category -

Length 16.8

Posted Over 1 Month

This is a Glastron Carlson C-500 metric boat that I started working on but never finished. The boat has been stripped down to bare-bones and is ready to be put back together. The transom has been put back in the boat and is stronger than original. I have the keel that is cut and shaped and ready to be put in the boat. There is a lot of work left to be done but a lot has been done. This is a perfect project boat for someone that is looking for one.

GLATRSON GS249

GLATRSON GS249

$14,000

Long Beach, California

Year 2000

Make Glastron

Model GS249

Category -

Length 25.0

Posted Over 1 Month

2000 Glastron GS249 Cruiser, partially restored. The boat is in good shape and many things have been replaced and restored. It has a strong 5.7l Volvo Penta engine with a dual prop and plenty of power. Boat is powerful enough to pull a wake or inflatables and comfortable enough for cruising around the bay. It has new audio, new upholstery, new batteries upgraded trailer hitch and many other things but it still needs a little TLC to get it to its full potential. Interior could use a cleaning and a hatch window is cracked other than that the boat is in great condition. Expecting our first born baby any time now and wife says my project needs to go.

1981 Glastron Carlson C-500

1981 Glastron Carlson C-500

$600

Miami, Florida

Year 1981

Make Glastron

Model Carlson C-500

Category -

Length 16.8

Posted Over 1 Month

This is a Glastron Carlson C-500 metric boat that I started working on but never finished. The boat has been stripped down to bare-bones and is ready to be put back together. The transom has been put back in the boat and is stronger than original. I have the keel that is cut and shaped and ready to be put in the boat. There is a lot of work left to be done but a lot has been done. This is a perfect project boat for someone that is looking for one.

1984 glastron envinrude with 300 hp v8 outboard, NEW ENGINE TIME CAPSULE!

1984 glastron envinrude with 300 hp v8 outboard, NEW ENGINE TIME CAPSULE!

$7,499

Saint James, New York

Year 1984

Make Glastron

Model Cvx-20

Category -

Length 20.0

Posted Over 1 Month

My family bought this boat new in 1984. It's a glastron Carlson cvx20 speedboat. The same boat used in all the James Bond movies. We had a mercury Mod vp on it it 1984 and the boat did 70mph. In 1985, envinrude produced this engine, the 300hp v8 outboard! We'll we sold the modvp and bought the v8. Needless to say we never finished the project. I mounted the engine to a brand new v8 rated jack plate about 10 years ago. Again, the engine is brand new! The lower unit was noseconed and powder coated. My father was a master machinist and engineered special stainless tie bars mounted to the stringers. Everything he made. When I removed that section of flooring, I used super high quality marine plywood glassed in with west system making it much stronger than what glastron did in 1984. There is a special brand new Latham hydraulic steering system for the v8 aswell. I ran all the wiring with Marine grade wire and all connectors are marine tinned. There is a Todd fuel tank with custom mounts and brackets my father welded from aluminum and had powder coating. There are so many brand new parts as the entire gauge cluster are nos gauges from omc. The boat has been outside shrink wrapped for years, the motor was on a pallet stored inside a heated garage for 27 years. The gauges have some condensation but dry out. I have all the owners manuals for everything. The engine, I have a factory parts manual and service book. I have the boats original windshield and center console(never installed). The seats need replacement but I saved them so you can have the pattern. I have new carpet for the boat in a roll. It has a shore lander trailer. It's sad my dad never got to see this boat run, he passed from ALS 3 years ago. So obviously you are buying a project boat but everything is there to complete her. Sold as is, where is. Any questions feel free to call or come to view. Thanks scott

Classic 1979 Glastron Carlson 23 foot Jet Boat CV-23

Classic 1979 Glastron Carlson 23 foot Jet Boat CV-23

$14,500

Olathe, Kansas

Year 1979

Make Glastron Carlson

Model CV-23

Category Cabin Cruisers

Length 23.0

Posted Over 1 Month

For Sale or Trade: 1979 Glastron Carlson CV-23 V8 Jet Boat---This is a 23 foot Classic Boat as seen in James Bond Moonraker movie Boat has been completely restored to like new condition---always stored inside---460 Big Block Ford V8 engine---newly rebuilt with less than 20 hours---high performance parts including marine hydraulic cam, aluminum intake, Holley aftermarket carb, billet distributor, hi torque starter, etc. Engine was professionally rebuilt by a well known engine builder was specializes in race engines Berkeley pump was rebuilt and has less than 20 hours also---also installed is a Place Diverter which allows you to adjust the pitch on how the boat launches---will allow for a quick plane of the nose when pulling a skier or can shoot a 25" rooster tail---Upholstery was touched up along with new throttle cables Seats 6 comfortably---has cabin for extra seating/sleeping---cabin has skylight that pops open for sun tanning on the front deck---Paint is original Gold Sequins with yellow bottom---top was re-cleared last year Trailer is matching yellow Sundance brand that came with the boat---tandem axle with brakes and new lights---We restored this boat complete---we had planned to keep it "forever" so didn't spare any expense---built with the very best parts---My job only allows us to use it 1-2 times a year---it needs to go to a family who will appreciate it and use it as intended when new Also includes newer marine battery, new travel cover, storage cover, radio & lots of additional parts---We also have a large tube, several sets of skies, life jackets, tow ropes, etc---that are available to purchase--or work into a package deal Sacrifice at $14,500 Will entertain trades/partial trades for a C1 or C2 Corvette---project or complete Call Jon at 913-488-2592

Boat Windshield ~ 1987 Glastron Conroy X

Boat Windshield ~ 1987 Glastron Conroy X

$275

Kingston, New Hampshire

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

For sale I have a good used boat windshield & glass. Came off from a 1987 Glastron Conroy X19S. Is in good used condition. Some hardware is included, see pics. May show some light signs of wear and tear, it was on a boat that was used. No cracks or large chips. May be a few light scratches here or there. Here are a few measurements, if you need others or more exact let me know. Single window is about 26" x 24", Double window is about 43 1/2" x 26" and long window total length is about 72". (measurements are approximate and may differ a bit due to the slant of windows) Good replacements, perfect for a restoration project! Please see pictures for a better detailed description and feel free to ask any questions you may have. I'd like $275 but will consider all best reasonable offers. Thanks for looking!!

Boat Windshield ~ 1987 Glastron Conroy X

Boat Windshield ~ 1987 Glastron Conroy X

$275

Kingston, Massachusetts

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

For sale I have a good used boat windshield & glass. Came off from a 1987 Glastron Conroy X19S. Is in good used condition. Some hardware is included, see pics. May show some light signs of wear and tear, it was on a boat that was used. No cracks or large chips. May be a few light scratches here or there. Here are a few measurements, if you need others or more exact let me know. Single window is about 26" x 24", Double window is about 43 1/2" x 26" and long window total length is about 72". (measurements are approximate and may differ a bit due to the slant of windows) Good replacements, perfect for a restoration project! Please see pictures for a better detailed description and feel free to ask any questions you may have. I'd like $275 but will consider all best reasonable offers. Thanks for looking!!

1988 Glastron CS-19

1988 Glastron CS-19

$1,000

Oshkosh, Wisconsin

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

1988 Glastron CS-19 Look no further... - Project Boat

1988 Glastron X 19 Bowrider & Trailer -  NEVADA

1988 Glastron X 19 Bowrider & Trailer - NEVADA

$2,900

Boulder City, Nevada

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

This auction is for a 1988 Glastron X 19 Bowrider boat and 1990 Trail Rite Galvanized trailer. This is NOT a project boat! This is turn key and has been to the lake more than 15 times this summer. The boat and trailer are currently registered and it is lake ready. The boat is an open bow model. It has the Mercruiser 3.0 130 HP 4 cylinder engine. The engine has a new starter, alternator and fuel pump. It runs like a top. The outdrive was completely serviced this spring. This boat has always been a fresh water boat. The bellows were replaced last year. It shifts smooth with no noises. The hull is in very good condition. It does need a buff and wax as the sun this summer has faded it a little. It comes with a full Bimini top as well as a full storage cover. All the instruments work except the trim gage. It has a AM-FM radio with a CD player. It has a fish finder/depth finder. The bilge pump, blower and horn also work good. The batter is a deep cycle and is in good shape. The upholstery is in good shape except the 2 cushions on the bow that are cracking some. The floor has a soft spot at the back but is fine for now. Besides that the boat floor is good. The gas tank is 26 gallons. The trailer is a 1990 Trailrite Galvanized. I put new lights, Tires, Bunks & carpet last year. The bearings were serviced then too. I just pulled this to Arizona 2 weeks ago with no problems. That was a 300 mile trip. I also added uprights on the trailer to make loading easy. I load this boat myself without getting wet. It drives right on the trailer.Overall this is a dependable boat for not a lot of money. NADA puts this at 2990.00 average retail and 2635 at low retail at 2635.00. I have bought a bigger boat and don't have room to store two. Please call Mike with questions @ 702-624-3266. I am on Pacific time. The boat is located in Boulder City, Nevada. Thats 20 miles From Las Vegas. Payment is expected within 3 days of purchase. I can deliver for a fee. Please only bid if you intend to follow through with the purchase. Thanks for looking!!!!

Customized v173 glastron 2 years on since rejuvinated

Customized v173 glastron 2 years on since rejuvinated

$4,000

La Junta, Colorado

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

This boat has been stored inside and in great shape, no mixing fuel and oil, vro oil injection takes care of that. The boat has been entirely repainted with epoxy paint color is wimbleton white, a ford color and customized two years ago. At that time , new interior package with wise seat package, all new wiring with a fused buss panel under dash, new bimini top, new Cabellas heavy duty cover, New instruments in dash, new battery, new side panels, new marine carpet, new drink holder and table, new depth finder, new bilge pump system automatic, new horn, new am fm cd player, Fire extingusher, prop new,new trailer axle, new hubs, bearings, and new L.E.D . trailer lighting.New fenders, and repainted trailer. We have trailer Title, and will give bill of sale for boat as Colorado has no boat titles, just registriation numbering with hull vin number. We purchased thisengine from Crowley Marine in Denver Co. summer before last. They completely rebuilt it with the Heavy Duty Gear case and lower unit,We paid 4000. for this engine by the time we had it installed on the boat. I had to do the new engine break in period of 20 hours as they specified. It now has aprox 30 total hours on it. The gas tank is built into the front of the boat, so you do not have to mess with cans. It has many nice features for an older boat. my price is less than half of what we spent on this project. We baught a much larger boat that seats eight people , reason for sale.