Tahiti Jet Boat Boats for sale

1-15 of 18

Sort By

1986 Tahiti jet boat

$6,000

Culleoka, Tennessee

Year 1986

Make Tahiti

Model -

Category -

Length -

Posted Over 1 Month

19 ft Berkley pump. Fast boat. Original interior gel coat cover and top

TAHITI JET BOAT 18' -PROJECT BOAT- AS IS- WITH TRAILER

$1,995

Pasadena, Texas

Year 1974

Make TAHITI 18' JET

Model -

Category Jet Boats

Length 18 FEET

Posted Over 1 Month

1974 TAHITI 18 FOOT PROJECT BOAT WITH SINGLE AXLE TRAILER. BEING SOLD AS IS WITH NO WARRENTY EXPRESS OR IMPLIED. NO RETURNS!.TEXAS CERIFICATE OF TITLE IN MY NAME. IN STORAGE SINCE 1986. MOTOR AND JET DRIVE TURN OVER BY HAND. BERKELY JET. 403 OLDSMOBILE BORED .030 (406) WITH 4A STEEL HEADS AND STEEL INTAKE MANIFOLD. MALLORY DISTRIBUTER. HOLLEY QUADRAJET CARBURETOR. HAS GUAGES. STARTER AND FLYWHEEL. GOOD INTERIOR. WHAT I KNOW IT NEEDS: STEERING ASSEMBLY (NOT THERE WHEN I PURCHASED BOAT (?), ACCELERATOR CABLE (THERE BUT RUSTY), REVERSE CABLE (THERE BUT RUSTY). HAVE REMOTE OIL FILTER MOUNT (GOES WITH BOAT). TRAILER NEEDS TIRES (DRY ROT) TO ENABLE TOWING IF NOT SHIPPED. WILL ARRANGE PICKUP LOCATION- NO SHIPPING.

1986 Tahiti Caribbean

$8,450

Omaha, Nebraska

Year 1986

Make Tahiti

Model Caribbean

Category High Performance Boats

Length 18'

Posted Over 1 Month

1986 Tahiti Caribbean JUST ARRIVED! 1986 Tahiti Caribbean 1986 Tahiti Caribbean 18ft. Jet boat with 454 Big Block Chevy engine with Berkley Jet Drive, dual Holly carbs, custom cover 80mph plus Good condition. Selling as is.

19' Tahiti Jet Boat (project)

$1,250

Lebanon, Pennsylvania

Year 1976

Make Tahiti By Bell Industries

Model Berkely

Category Jet Boats

Length -

Posted Over 1 Month

I started to restore the boat a couple years ago. My son sprayed a coat of gel coat on it but they must have given him the wrong hardener as it took forever to set up. I reupholstered the seats and have the backrest done. I have the vinyl sewn for the side panels but never got around to installing it. I spent almost 400. in marine vinyl alone. There is spare jet parts, Edelbrock exhaust logs,new parts and spare parts that go along with this. I started to sand the boat as I was just going to put epoxy paint on it and that's about where I stand with it. The motor is a 455 Olds and has a Berkely Jet Drive. The motor is free and did run before the restoration was started, but I have not had running since. I just don't have time to deal with it. Hull is in good overall shape and the boat has a new fiberglass reinforced plywood floor in it. I also have a new marine stereo system/speakers available if buyer has interest. Comes with clear title/trailer. First 1250.00 takes it .Local pick up only.Located in central PA.

1976 Tahiti Jet

$8,500

Fresno, California

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

1976 Tahiti Jet Boat. This is an all new 19 foot boat with a 350HP Chevrolet marine engine with roller cam. It has new upholstery repainted trailer LED lights fiberglass exterior ski step swim step wiring and place diverter. This is a great family boat. Financing and Nationwide Shipping may be available to qualified buyer.

1976 Tahiti Jet

$8,500

Fresno, California

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

1976 Tahiti Jet Boat. This is an all new 19 foot boat with a 350HP Chevrolet marine engine with roller cam. It has new upholstery repainted trailer LED lights fiberglass exterior ski step swim step wiring and place diverter. This is a great family boat. Financing and Nationwide Shipping may be available to qualified buyer.

1978 Tahiti Jet

$13,995

Lake Havasu City, Arizona

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

1978 Tahiti Jet Good Clean Nice Running Classic Old-School Jet Boat, 250 HP AMC 360 V8, Panther Jet, Through Hull Exhaust, Ski Tow, Upholstery In Good Condition, Tandem Axle Trailer. $13,995 - Ask About Our On-The-Spot Financing (o.a.c.)

1976 Tahiti Jet

$8,500

Fresno, California

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

1976 Tahiti Jet Boat. This is an all new 19 foot boat with a 350HP Chevrolet marine engine with roller cam. It has new upholstery repainted trailer LED lights fiberglass exterior ski step swim step wiring and place diverter. This is a great family boat. Financing and Nationwide Shipping may be available to qualified buyer.

1980 Tahiti 18 Tahiti Jet Drive

$2,000

Dawsonville, Georgia

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

18 Tahiti Bowrider Jet Boat Better hurry! Recycling begins in September.This boat has a good hull and some engine parts with the jet drive, but needs a lot of work to get it lookin new. Could be a good project if you wanted to spend the time, this is a classic boat.

1972 18 FT Tahiti Jet Boat

$5,500

Concord, California

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

450 HP big block chevy engine with a Berkeley Jet and jetovator. I just rebuilt the carburator and it has a brand new battery and brand new tires on the trailer. The boat is in excelent condition and is ready use. All the paperwork is in order with all current registrations.

1978 18' Tahiti Jet

$13,995

Lake Havasu City, Arizona

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

Good Clean Nice Running Classic Old-School Jet Boat, 250 HP AMC 360 V8, Panther Jet, Through Hull Exhaust, Ski Tow, Upholstery In Good Condition, Tandem Axle Trailer. $13,995 - Ask About Our On-The-Spot Financing (o.a.c.) Phone Number: (Nine Two Eight) Four Five Three - Eight Eight Three Three www.theboatbroker.com

1972 Tahiti Kona

$3,995

Lancaster, California

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

1972 Tahiti Kona Pro-Built 468, Berkeley Jet w/jetavator, New Interior. Just checked and serviced. Perfect boat for the river and ready to go. - 18' Jet Boat

19' 1977 Tahiti Jetboat

$9,500

Colusa, California

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

Please call boat owner Larry at 530-870-2746. All comp parts Berkley racing jet, Jetenator, Berkley jet, new unused Merlin racing heads, anchor, Bimini top, new 2014 carpet, bilge pump, full gauges, dual axle matching trailer w/chrome mag wheels, new tires, custom mooring cover, storage, The ignition is MSD with Rev limiter, dual batteries, bucket seats, ski eye, blue wave decals, prof. maintained.

2002 Aftershock Power Boats 21 foot Tahiti

$17,900

Rancho Cucamonga, California

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

2002 Aftershock Power Boats 21 foot Tahiti,2002 aftershock boat 21' 350 Mericruiser 100 hours .clean boat . Stock stereo, break-away hitch, thru/hull exhaust, registration good until 2015Just serviced before the summer 3000$ in work done new lower drive. Fun boat,turns heads everywhere.18,500$oboKey words: hallet, aftershock, cheetah, Howard, ultra boats, boats, essex, bay liner, sea ray, performance boat, jet boat, flat bottom, river toy, wakeboard boat, magic deck boat, pontoon boat, ski boat, fishing boat, fast boat, havasu, Parker , Laughlin. $18500, 9099122168

1970 Sidewinder 16 Super SIdewider Mercury 150

$1,500

Dawsonville, Georgia

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

california Sidewinder This is are clasic in all original condition. the transom is weak. Seacast will fix it. This is powered by the authentic Tower of Power Mercury 1500. Trailer included. read below the history. we have two of these boats. The other is boat only with no power. Brokered Boat 10.28.11 The Sidewinder trademark (for boats) was filed with the U.S. Patent and Trademark Office on January 6, 1969, under the name of Los Altos Marine Incorporated, located at 4898 El Camino Real, Los Altos, California. In their 1969 model full colour brochure, Sidewinder Boats claimed to be the world's largest designer/producer of V-bottom ski boats, with manufacturing facilities in California and Canada. Built for speed, Sidewinders were designed for the ultimate in racing, skiing, and personal pleasure. World record holder, Ken Baker, had designed two high performance hulls - the famous V bottom and the new tunnel. These hulls were multi-laminated and assembled by hand. Variety and choice were the order of the day with standard and deluxe versions, thirty-two colour combinations, and power plants from outboard through inboard-outboard and jet available. Appointed with choices of metalflake trim, racing stripes, tuck and roll wrap around vinyl seating, and colour keyed all weather carpeting, these stylish, powerful, and manoeuvrable boats turned heads at many a beach. (In fact they still do!) Models available in 1969 were the V- bottom, low profile (Lo Pro) designs in 16 and 18 ft. lengths. Both could be had in the Deluxe version (16 ft. at 750 lb. and 18 ft. at 900 lb.) or the "stripped down" (100 lb. lighter) Standard versions. They could be had in outboard (135 hp max for the16 and 150 hp max for the 18), inboard/outboard (140 hp max for the 16 and 225 hp max for the 18) or jet drive (350 hp max for the 16 and 500 hp max for the 18 - although text in the brochure claims up to 600 horsepower was available!) Engines up to 455 cu. in. could be had. The tunnel model version, used predominately for racing, was available in either a 15 ft. or 17 ft. length, and could be custom built for single, double and triple outboard engine classes. The revolutionary Super Sidewinder 16/18 ft. design was filed for a patent (by Ken Baker and Ronald Plescia) in the US on October 17, 1969 and granted patent on November 3, 1970 (Patent Number 219,118). Subsequent patent designs were filed and granted for the 14 ft. Super, XL deep-vee, and XL Tri-hull. In 1970, Sidewinder relocated from Los Altos, up the road to 3545 El Camino Real, Palo Alto. In 1970 and '71 boats were also manufactured in Murfreesboro, tennessee. Meanwhile Sidewinders were being manufactured under the Cobra name, by California Fiberglass Limited in British Columbia, Canada. In 1971, Ken Baker, president of Sidewinder Marine, Inc. in Palo Alto, California was in litigation over a lawsuit filed by Sidewinder Marine against twenty manufacturers, who had copied the revolutionary Super Sidewinder design, first produced in 1970. Imitators included Marlin, Tahiti, Wriedt, and Taylor. In 1971/72 production moved from Palo Alto to Anderson, CA. and by July 1972, at least four manufacturers had admitted infringement on the Sidewinder design patents. About 1971 Canadian Sidewinder production moved to Ontario, where, by 1972, they were manufactured as Sidewinders - not Cobras, by California Glass Marine. In 1974 the Thompson Boat Company purchased manufacturing rights for Sidewinder boats and continued to manufacture them under the Sidewinder banner at Peshtigo, wisconsin. Later Sidewinders (by this time only the 16 and 18 ft. Super models) were built by Thompson in St. Charles, michigan and finally in Swan Creek, Michigan. In Canada the last Sidewinders were made in the late 1980's and California Glass Marine folded in the early '90's. The last US Sidewinder (the 18SS) appeared in the 1990 Thompson Boat Company brochure. Thompson met its demise in September 2002, when the assets were sold in a liquidation auction. 1969 Information