Trs Out Drive Boats for sale

1-6 of 6

Sort By

1979 Donzi Hornet II

1979 Donzi Hornet II

$23,500

Tenafly, New Jersey

Year 1979

Make Donzi

Model Hornet II

Category -

Length 20.0

Posted Over 1 Month

Up for sale is my 1978 Donzi Hornet II which has been fully restored. I will touch base on all the specs in this posting. Please read the entire add before asking questions that may have been answered.First and foremost, the only reason I am selling this boat is to help pay for an addition to my house and help with a wedding. I DO NOT want to sell this boat and I have invested more than my asking price without what I paid to purchase the boat. This boat has been in the family since the early 1990's and always maintained. In the mid 1990's the entire structural part of the boat was redone and restored. The top half of the boat was removed. More like a cap off restoration. The stringers, bunks were removed and new wood along with fiberglass was installed. The entire bottom half of the boat was completely redone and it sure shows. The boat is super clean where it matters most. The boat drives like a charm and handles the water extremely well. The entire "top half" of the boat was redone as well. The fiber glass was sanded, repainted and clear coated. The entire interior was redone with new vinyl for the seats and new carpet for the floor. During that time the original engine was removed. A 1970's Chevrolet 4 bolt motor was installed which was mated to a TRS Drive. The internals were removed and replaced with all marine components. Fast Forward to 2013. I finally picked the boat up and was mine. I decided to redone the engine and "freshen" things up. I removed the 1970's 454 that was in the boat and dropped it off at RPM's Engines in Westwood, New Jersey. I advised the builder "Doc" that I wanted a fully built engine with all quality internals. The block was checked for cracks, etc etc.The block was in great shape and was reused. The builder kept stressing to me how solid of a block I have and was impressed that it was a 4 bolt rear block. During the build I boughtall new forged internals; Crank, Rods and Pistons. The engine was bored .10 over as I wanted to keep it as close to stock as possible. The compression if I remember correctly is 9.5-1. The heads are aluminum edlebrock marine performer rpm heads with all crane internals; push rods, roller rockers and valves. I went with an aggressive lope, crane roller cam. The engine has maybe 20 hours on it and was only used in fresh water 5 times. The motor is perfectly healthy, sounds absolutely beautiful and runs like a phenomenal.I bought a brand new Stainless Marine (out of Miami) exhaust manifolds and risers mounted to a 3" gil stainless steal tip which cost roughly 2900.00 alone!. The motor has a 1970's corvette 750cc carburetor which was rebuilt summer of 2014 by Steves Carburetors in Lyndhurst, New Jersey. The motor mounts were custom to allow the engine to mount and sit properly in the boat. The TRS drive and transmission were fully rebuilt in the late 2000's and has zero issues. The drive is build to handle roughly 450HP and 450 FT/LB TQ. The drive is still in perfectcondition and handles great. I do not abuse the engine or drive, I always accelerate at a moderate rate to reduce the change of any added stress to the drives. The drive is mated to a 24inch prop. (BOAT FLYS)The boat has a gil stainless steel water strainer, gil stainless steel exhaust tips, exhaust tip housing, I bought new new oil and power steering pump oil coolers in the spring of 2014. I bought a brand new steering piston, installed new cables for the steering as well. I replaced all the belts and hoses on the boat as well. All brand new 1 1/4 inch marine grade hoses. All new hose clamps (t-bolt clamps). I had the alternator rebuilt. I had all new gauges installed in the summer of 2014 by Hardin Marine. Gauges are black in color, look sleek and are 100 percent accurate. Boat also has a magneto distributor which I had the magnetos redone in the winter of 2013. I am honestly forgetting something but I replaced just about every single nut and bolt when I rebuilt the engine. I had the drive removed and had the lower unit sealed.I installed a new gimble housings, two new TRS drive lift pistons all brand new and replaced. Money was not a factor when I decided to fix all the issues. The boat became a project once i started to redo the engine and rebuilt everything else. The boat is 99 percent done and does need some small attention to detail areas. The boat has a brand new bilge pump but needs to be wires. Everything is ran, just not hooked up. The windshield seal is old and could be replaced. The steering wheel needs to be replaced as it shows signs of being dirty. The bad:-I am an honest person and am probably being to anal but I would rather disclose everything about the boat. The interior is in good shape but does show some signs of wear and tear in some spots. I would say the boat shows more signs of wear on the blue vinyl. The white seats all appear to be in good shape.-The gauge panel has a small crack but is barely noticeable-The boat does have a few small "stress cracks" mainly on the rear of the boat near the latch-The rear of the boat where the hatch opens and closes does show slight use. I would say with a good compound and wax, alot of the small scratches will be removed.-Some of the paint is chipped on the TRS Drive but the drive works perfectly so who cares! Other than that, the boat is a true beauty, I get compliments where ever I go. The boat sounds like a hot rod and draws attention every where. This is a true turn key boat! Any questions201-913-5613NO TRADES!

Wellcraft Excalibur 27' Speedster 502 MPI Boatmaster alum trailer offshore NICE

Wellcraft Excalibur 27' Speedster 502 MPI Boatmaster alum trailer offshore NICE

$13,000

Fernan Lake Village, Idaho

Year 1998

Make Wellcraft

Model Excalibur 27 Speedster

Category Offshore Boats

Length 27.0

Posted Over 1 Month

1983 27' Excalibur Speedster (new cover last season) This boat has been in my family a long time. I am only selling due to focusing on other things right now. Not because I WANT to sell it.......... 1998 375 Hp 502 Mercruiser crate motor MPI with closed cooling system. Engine install is very clean. 500 hrs on engine. New impeller last season along w/ all accessory drive belts. Oil & filter changed as well as fuel filter. New batteries last season. Has isolator switch to turn off or connect both. 2008 BoatMaster all aluminum trailer (has spare & surge disc brakes) Custom Marine Headers (stainless) exit under swim platform. Original TRS Drive I've had it push 63-64 @ 5150 rpm on the GPS, but the really nice thing is it cruises around 40-45 at 3500-4000 rpm...Hence making it a relatively fuel efficient for a boat, not that there is such a thing. The dash is the original Excalibur Marine Dash, but with "newer" Gaffrig Gauges w/yellow bezels. I also replaced the Hydraulics. IE: Trailer Trim Pump and Rams, and Internal Power Steering a couple years ago. The cabin is very plain, completely open with a bench on each side, a little storage area in the very front of the bow, and Porto-Potti area in the V berth. It has a Clarion Head unit & amp as well. The boat has always been outstanding and reliable on the water, and VERY mechanically sound. Interior & seats have a couple rips from age. Located in Coeur d'Alene, Idaho just east of Spokane, Washington. I will also assist in shipping if needed. I have some transportation contacts. Do not bid unless you intend to purchase. Feedback will be left after received & please fill out the DSR reports. There is no buyers remorse. You bid/buy you own it plain & simple. All shipping costs will be based off of the ship to address but, are responsibility of the purchaser . Also there are no warranties unless stated. What you see is what you get so look closely and ask questions. Also, if "time is of the essence" please inquire about how long it'll take. I make no guarantees other then I'll do it ASAP. If you have any questions call or text me at 208-771-0882 Be sure to check out my store!! Be sure to add me to your favorites list!I have a " real " job & only do this on eve's & weekends. So, that being said please realize I have a normal life & it takes time to do things whether it's replying to inquiries or shipping. Also, I state it's shipping & handling which includes supplies, my time etc...... If you don't like my way of doing business don't bid. Very simple really. Thank you, MRSUPERSPORT Check out my store! On Apr-26-15 at 18:09:48 PDT, seller added the following information: Boat is listed locally as well so listing may end at any time.

1986 24' TAHITI with 502 Mercruiser + Heavy Duty Tandem Trailer

1986 24' TAHITI with 502 Mercruiser + Heavy Duty Tandem Trailer

$8,500

Sarasota, Florida

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

24' Tahiti -- 1986 502 close cooled Mercruiser, TRS drive, new manifolds & elbows. Runs great! Stainless steel radar arch with Furuno radar. New interior that has never been installed. Must see! Comes with heavy duty tandem trailer. $8500. Please call (941)362-3778. Can be seen at Max Marine in Sarasota. Max Marine Service 1326 Mango Ave Sarasota, Fl. 34237 (941)362-3778 Check out our website at maxmarine.biz Let us sell your boat on consignment!

27' Excalibur Flatdeck

27' Excalibur Flatdeck

$17,000

Canyon Lake, Texas

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

27' Excalibur LS7/454, TRS out-drive This boat has been meticulously maintained and stored inside and seen freshwater use only, it's a turn key 80mph (on radar) boat with less than 600hrs on it. It's on a Baron tandem axle trailer w/4 new tires that were put on the trailer (10/21/10) and the only miles(30) on them is from the tire shop to the storage unit. LS7/454, Edelbrock Torker w/780 Holley dp, Crane Fireball cam and roller rockers. 17,000.00 or best offer

1983 CHRIS CRAFT  Stinger

1983 CHRIS CRAFT Stinger

$39,900

Perkasie, Pennsylvania

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

1983 CHRIS CRAFT Stinger - 390X Offshore Power boat Vehicle Information / Condition 1983 40' CHRIS CRAFT 390X STINGER - OFFSHORE POWER BOAT - MUST SEE! VIN: CCBAL 096M8 3C390 Manufacturer: Series or model: STINGER 390X Engines: Twin 454 cu in. Chevy Blocks - bored .60 over with super chargers - 620 HP each This boat must be seen to be appreciated! ... this model, the STINGER - was made very popular as it was featured in the very first season of the MIAMI VICE series in the 80's Dependable and Safe - Conservavative 75+ MPH TOP SPEED and 50 MPH @ 3500 RPM Cruise Boat was originally built in 1983 before Murray take over, and has NOTCHED TRANSOM. This boat is in PERFECT condition and has always been well maintained as shown it the pictures below - You will not find a nicer example!!! 10 HOURS ON TWIN BALANCED AND BLUEPRINTED 454 (.60 OVER) 620 HP BLOWN CHEVY MOTORS B&M 250 BLOWERS WITH TWIN 850 CFM NICKERSON CARBS STELLINGS STAINLESS STEEL HEADERS (ELECTRIC AND PLUMBING SET UP FOR CMI MUFFLERS WITH AIR ACTUATION) MOTOR PARTS INCLUDE: EAGLE FORGED CRANKS EAGLE FORGED CONNECTING RODS CRANE HYDRAULIC ROLLER CAM CRANE ROLLER ROCKERS JE PISTONS CANTON HIGH CAP OIL PAN BILLET ALUMINUM OVAL FLAME ARRESTOR ALUMINUM TIMING COVER ALUMINUM VALVE COVERS MERCURY THUNDERBOLT IGNITION FLUID DAMPER BALANCER HARDWARE INCLUDES: ARP ENGINE FASTENERS SS BRAIDED FUEL LINES COMPLETELY RIGGED WITH STAINLESS STEEL FASTENERS THROUGHOUT ENTIRE BOAT Boat was repainted in 1992’ with new single piece electric actuated lightweight engine hatch to facilitate easy access to engine compartment - and still has padded sun deck) ADDITIONAL UPGRADES INCLUDE: COCKPIT RE-UPHOLSTERED IN 1998 FRESH TRS DRIVES IN 2000 WITH BROVO 1 SS 4 BLADE PROPS FRESH BORG WARNER TRANSMISSIONS W/ HEAVY DUTY CLUTCH PLATES 2000 HYNAUTIC HYDRAULIC ASSISTED STEERING WITH MERCURY PRIORITY STEERING VALVE (which means boat will have power steering with either motor running) KEIKAFER TRIM TABS NEW MERCURY HIGH PERFORMANCE KEIKAFER POWER TRIM AND TAB PUMPS NORDSKOG SPEEDOMETER AND AUTOMETER GAUGES NEW FULL COCKPIT COVER AND FULL CANVAS WINTER COVER INCLUDED The following items are also available to the new owner: TWO TRS PARTS DRIVES - ONE SPARE TRANSMISSION - ALSO..... BEAUTIFUL MYCO TRIPLE AXLE TRAILER WITH TORSION SUSPENSION AND SS DISK BRAKES available for an additional $9500.00!- (This trailer has been totally rebuilt and painted yellow in 2002' adding a full drive guard and top rail bridging.) Buyers are welcome to survey or inspection with appointment. The boat is kept indoors (out of the weather) in a private warehouse near Trenton NJ and is approximately 45 minutes from the Philadelphia International Airport. For more information please e-mail me with questions!   [email removed] or give a call at (267) 261-8137 ...and I will try and have all of your questions answered by the owner very quickly.

1984  Monza  MX-24

1984 Monza MX-24

$4,990

Providence, Rhode Island

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

1984 Monza MX-24 Monza MX-24 Cuddy Cabin Powered by a MerCruiser 454 producing 375 HP with TRS drive our Monza runs out at 60+ MPH. Interior is in nice condition and she comes with a 1999 tandem axle American roller trailer. $4 990.00 BUYS the complete package. Boats|Cuddy Cabin [4443 PSN] Click here for more information