Wood Custom Boats for sale

1-15 of 2,556

Sort By

1978 Custom 47 Longliner

1978 Custom 47 Longliner

$35,000

Charleston, South Carolina

Year 1978

Make Custom

Model 47 Longliner

Category Longliner

Length 47

Posted Over 1 Month

The boat for sure needs an owner that is willing to work on the boat, make full ready, would need haul-out and bottom paint. Great boat for higher budget buyer looking to put the time and TLC needed to get this large vessel rolling and producing. She is a working vessel and is in working condition. The wear and tear that is shown are what you would expect from a working vessel of her age. The seller reports that all equipment is in working condition. Stock #272152 ***SALE PENDING*** 47' Fiberglass over wood longliner powered by a 671 Detroit Diesel UPDATED PRICE, this price does not include any of the current permits. This price does include the items shown in the pictures. This Custom 47 Longliner is built for work. She has all the equipment needed for commercial fishing needs. She has an 8,000 lb Ice Hole for storage. This vessel is construction is fiberglass laid over wood. There are 5 crew bunks for overnight work, 3 top cabin bunks, and 2 lower deck bow bunks. The Davit is hydraulic. Concerned with fuel economy, this boat sips fuel when cruising. The vessel is equipped with a full array of Navigational equipment: This one can go a long way, the fuel is divided into (4) 500-gallon Fuel tanks as well as Rudder indicator. Reason for selling is not using at this time, does not have crew to work the vessel.

1986 Custom Hans Knoll 46 Schooner

1986 Custom Hans Knoll 46 Schooner

$60,000

St Catharines, Ontario

Year 1986

Make Custom

Model Hans Knoll 46 Schooner

Category Schooner

Length 46

Posted Over 1 Month

The seller advises the boat is ready to set sail with no known issues currently. **I have not viewed this vessel in person. All information and pictures were provided directly by the seller. Please do not hesitate to contact me with any specific questions you may have, to submit an offer, or schedule a showing. Stock #253009 Perfect for Experiencing Classical Navigation While Enjoying The Benefits of Being on The Open Water ***Please make sure to see the video for additional pictures of the vessel! The vessel was personally built by Mr. Hans G. Knoll and launched in 1986. The hull configuration is a raked bow, fin keel and counter stern. The vessel is a standard cruising schooner with two-third covered and aft one-third open. The hull construction is ferro-cement over steel reinforcing frames and ribs. Room for 4 to sleep, the main berth is for 2, plus the starboard settee turns into a bunk. There are 2 twin-size beds at port & starboard, behind the benches. There are 2 masts (steel & wood) with 6 sails included. There are 2 topsails, 2 jib sails, 1 main and 1 foresail. Equipment includes 2 Danforth anchors with 200' of chain. Features include a retractable bowspirit, 2 compass, GPS, depth sounder, 3 VHF radios, stereo, six 60-gallon water tanks, LP stove and oven, fridge, icebox, pressurized water, head, and boarding ladder.

2007 Custom 16

2007 Custom 16

$97,000

Kansas City, Kansas

Year 2007

Make Custom

Model 16

Category Other

Length 16

Posted Over 1 Month

Very light use and a complete rare design for fun on the water. This is normally stored inside when not in use or enjoyed on fresh water. Completely gone through in 2018 by a former Chris-Craft builder. Stock #176116 The Little Leon is a scale replica of the Square Sail Brigantine "Leon". She was entirely hand built from scratch. A complete one of a kind! Exact 1/8th scale of the famed square rigged Norwegian Brigantine "Leon". Only continue looking if interested in a conversation starter that will turn heads every where it's sailed and docked. A unique hand-made design which is also able to be disassembled and trailered on the included trailer. Seating for 6-8 people enjoy a fantastic sail and steady ride thanks to the onboard water ballast system. The hull sides are Australian hardwood with masts made of American Pine. MAST: Two masts made of pine wood. MAST STEP: The fore mast is stepped on the forward ballast bulkhead. The aft mast is stepped in the bilge SPREADERS: Four spreaders on the fore mast. SHROUDS AND STAYS: The forward mast has eight shrouds both port and starboard, all made of nylon rope. Five are 1/4", one is 3/16", one is 5/32", and one is 3/32". The aft mast has six shrouds on each side, all nylon rope. There are four 1/4", one 5/32", and one 3/32". The foremast also has a total of six upper shrouds. The fore stays are attached to the bowsprit. The back stay of the forward mast is attached to the aft mast. BOOMS: There is a bowsprit and a bow boom. TURNBUCKLES: There are no turnbuckles rather dead-eyes. CHAIN PLATES: The chain plates are Futtlocks. They are 1/8" bronze rods attached to the topsides then attached to the dead-eyes. MAST SUPPORTERS: Hardwood mast partner and mast step, reported as serviceable. SAILS MAINSAIL: There are four square sails on the forward mast. Three stay sails (jibs). There are gaff rigged sails on the aft mast.

2006 Custom 29 Bartender

2006 Custom 29 Bartender

$20,000

North Charleston, South Carolina

Year 2006

Make Custom

Model 29 Bartender

Category Cuddy Cabins

Length 29

Posted Over 1 Month

The local and visiting consultant was very impressed with this vessel, the first one of its kind I have personal been aboard. The vessel appeared to be classic, but much newer and allows for much more peace of mind with the newer diesel engine as well. Being that the boat is wood, this style and build requires constant attention and love from the owner. Stock #331637 BEST OFFER NEEDS TO SELL Classic and Beautiful lines, Catepillar 3056 diesel engine, Ready for a SUNSET CRUISE 2006 custom-built 29 Bartender vessel for sale. BEST OFFER, needs to sell, not using at this time. Seller has moved from the area. Update to listing: The owner will be removing the listing from the water and shipping the vessel to Tennessee if not sold. Seller will honor the listed price while the vessel is still here in the Charleston market and sold prior to him having to move the vessel. A great chance to own something that looks like a classic, but built much stronger and much newer, with a much newer engine. This vessel was custom-built for the original owner. Currently the second owner is selling due to having to move out of state and does not have the time to enjoy and use the vessel. This vessel is powered by a 3056 Caterpillar engine that produces 205 HP. Low hours on the engine are currently sitting at 233 hours. The helm is a center keel design allowing for good visibility while captaining the vessel, to the left of the helm is a small space with a pump-out toilet and to the right side is the entrance to the cuddy cabin area. The cuddy cabin area has nice space, there is a dinette, sink, and large cushioned bow berth space for sleeping or napping. The rear seating space at the stern comes fully cushioned as well, shown in the pictures. Also, the entire cockpit space is shaded with a large bimini and hard top with a windshield. This would allow for the vessel to be used or navigated in colder weather or wet weather while having protection. Reason for selling is moving out of state.

1983 Custom Willy Roberts

1983 Custom Willy Roberts

$20,750

Coral Gables, Florida

Year 1983

Make Custom

Model Willy Roberts

Category Flats Boats

Length 19

Posted Over 1 Month

The boat is in very good condition. The seller is said to rarely use the boat since it was re-done (New engine and fiberglass work). The boat has very little and barely noticeable gel coat imperfections and appear to be cosmetic only. There are no noticeable gel coat or spider cracks observed. The bottom paint appeared to be in very good condition. The motor and lower unit really looks spotless. Inside of the engine there are no signs of rust or oxidation. Everything appears to be in good condition. The propeller has no noticeable imperfections. The trim tabs, Engine tilt and trim and all other electronics were observably working. The motor is equipped with a Hydrofoil stabilizer for maximum performance. Stock #222073 Excellent Condition. ideal for shallows and fishing with plenty of room for other activities. Reproduction Willy Roberts. The 1983 Willy-Roberts Skiff Project dream boat is built with the bones of the Florida Keys 1960s flats boats era in mind. Fishing in the historic back country of The Florida Keys was never complete without a Willy Roberts Skiff Boat. Willy Roberts boats are known for having lots of wood trim and accents and some are completely decked out in it. Modern touches to this boat however, include hydraulic steering, GPS, Lenco Trim Tabs, and a 70-HP Yamaha engine, and off-course coats of gel coat in the exterior for maximum protection from the saltwater elements. YAMAHA's newly released F70 four-stroke marks a further continuation in the evolution of light, powerful and fuel-efficient outboards. The inline four cylinder F70 is said to be an enhancement popular F60. The F70 shares the same displacement (996cc) and is only marginally heavier (10kg) than the F60. There is a significant difference between the F70 and its predecessor the F60. Unlike other 16 valve engines, the F70 operates via by a single, not dual, overhead camshaft. This gives it a weight advantage over its competitors in the 70-75hp class and also increases performance. With this in mind, This Yamaha engine powering this unique and relatively custom boat, creates a top maximum speed of 40 MPH with a cruising speed of 30 MPH and only an average fuel consumption of 4 miles per gallon at its cruise speed. This remarkable machine is uniquely built for the treasures Back Country of the Florida Keys and all of what the Flats fishing has to offer. This is a one of a kind custom made replica or a reproduction of a Willy Roberts Reason for selling is financial reasons.

1989 Custom Carolina Lewis Brothers 38

1989 Custom Carolina Lewis Brothers 38

$119,900

St. Petersburg, Florida

Year 1989

Make Custom Carolina

Model Lewis Brothers 38

Category Sportfish/Convertibles

Length 38

Posted 1 Month Ago

Hull is wood sheathed in fiberglass. Appears to be in excellent condition structurally. The seller has put a lot of work into the boat including all new windows and a lot of paint and updated upholstery - while there are still a few areas of the boat that will need some paint and touch up this boat is so solid and so impressive that it's worth the time to put in to make this one even better than it is. Bottom was painted in 2023 All dimensions are estimates based on rough measurements. Any buyer should conduct so diligence at inspection to verify any and all important measurements Stock #375979 Carolina Custom 38 many renovations completed This 1989 Lewis Brothers custom Carolina sport fishing boat is extremely rare and very Stout. Hand built on Harkers Island in North Carolina by the famed Lewis Brothers with plank on wood frame construction, completely sheathed in fiberglass, the hull on this boat is solid and strong. Much stronger than a boat made of fiberglass alone. Clean simple layout inside this boat would be great for a dive operation, a charter fishing boat or even one of the most unique and prestigious family fishing boats you could buy The seller did a lot of work on the boat including all new windows and reupholstering the seats. The boat is equipped with an 8 KW Onan generator The bridge is equipped with a clean layout that includes Furuno TZ Touch 2, VHF Radio, compass and gauge package Reason for selling is downsizing.

2017 Custom Built St Pierre Dory

2017 Custom Built St Pierre Dory

$37,400

Arvada, Colorado

Year 2017

Make Custom Built

Model St Pierre Dory

Category Pilothouse

Length 32

Posted Over 1 Month

Great condition, very well cared for. There is no sign of any broken, damaged, or missing items. It has not been smoked in, and no pets. According to the seller all systems and functions are fully operational. Of course, we always recommend that any buyer inspect the unit or have it independently surveyed to confirm the unit's condition before purchase. Stock #389986 32' Custom built with fiber glass hull over wood. Plans were purchased from Nexus Marine Bellingham WA and are based on a St. Pierre Dory. This custom-built St. Pierre Dory custom boat is wonderful for poking into coves, looking at the scenery, fishing, enjoying time with friends, and other similar water activities. Plans were purchased from Nexus Marine Bellingham WA. The plans are based on a St. Pierre Dory. The boat is 5' longer than the plans so more of a custom design. This is a Pilothouse built to be trailered so the beam is only 8'6" wide. This boat features an upgraded/larger outboard engine than what is needed for this boat to cruise across the water. The motor is mounted in a traditional dory well where it is easy to maintain and tilts up. The wheelhouse features two cockpit seats and ample storage cubbies. Down below there is a double berth, a porta-potty, and a galley counter/cabinet with a portable camp oven. Reason for selling is no longer using.

1976 Custom Built 50' Yawl

1976 Custom Built 50' Yawl

$100,000

Morro Bay, California

Year 1976

Make Custom Built

Model 50' Yawl

Category Yawl

Length 50

Posted Over 1 Month

Per the seller, the hull is old-growth Douglas Fir with steam-bent oak ribs and sealed over with fiberglass. She is super watertight other than the normal slow accumulation from the prop. Block and tackle are handmade of bronze shivs and locust wood... a few are Douglas Fir. Hand-shaped mast and hardware... Custom bulwarks and bowsprit.. The masts measure up to 40' and the sails are canvas. The rigging was replaced in 2021. Stock #276005 Very Unique ONE-of-a-kind, hand-built replica of the "Spray" famously first singlehanded circumnavigation of the globe by Joshua Slocum in 1895-1898. Located in Morro Bay, California - This Nautical classic is truly one of a kind. Built as a Replica of the world-famous vessel the " Spray" - which was famously, the first single-handled, circumnavigation of the globe by Joshua Slocum in 1895-1898. Back in the good ol' days of Celestial Navigation. ---KEY FEATURES / VESSEL OVERVIEW--- The interior floor plan is pretty basic. In the fore cabin, there is a small galley and sitting area attached to the master bunk. She has a small office in the foredeck with a fish hold between the Port and Starboard cabins. There is a small head in the aft cabin. She's powered by a Perkins 4-108 and carries 200 gallons of fuel. This beauty was built over a ten-year period by local Los Osos shipwright Bob White and finished in 1976. The seller believes she sailed to Hawaii and around the channel islands. Per the seller, she glides on the water and sails like a dream.

1994 Custom Built 55' Motor Yacht

1994 Custom Built 55' Motor Yacht

$595,000

Honolulu, Hawaii

Year 1994

Make Custom Built

Model 55' Motor Yacht

Category Motoryachts

Length 55

Posted Over 1 Month

​ According to the sellers, all systems are fully functioning as they should be and she is structurally sound with no known issues. She cruised from Ala Wai to Keehi for her most recent haul-out and bottom job in October 2022. ​Don't miss out on this once-in-a-lifetime opportunity to take over this outstanding and well loved yacht in the beautiful South Pacific! Stock #265666 Few Boats Have This Kind of WOW Factor! Beautiful One-of-a-Kind Custom Built Yacht -- Amazing Floating Home or Dock Charter Opportunity This is truly one of those vessels that must be seen to be appreciated! This one-of-a-kind custom built steel hull beauty offers all of the space and amenities of a house or condo yet with the novelty and excitement of living on the water with outstanding views of Waikiki and the ocean. DON'T MISS THIS OPPORTUNITY TO OWN AN AMAZING 2BD/2BA FLOATING HOME in THE SOUTH PACIFIC!!! She could also become the perfect and profitable "Dock Charter" endeavor you've been dreaming about or a "time-share" style condo between family and friends. This fabulous yacht was designed and constructed to meet her owner's discerning requirements for a very elegant and structurally sound vessel. She is unique in both design and construction. You are guaranteed to be impressed with every inch of this exceptional yacht, which is in a class all of her own! Built in Hawaii between 1994 and 1997, she was meticulously designed for comfort, spaciousness and luxury, taking every detail into careful consideration. Her 22' beam provides 2000 sq. ft. of living space on two interior levels and an additional 1500 sq. ft. of deck space, offering breathtaking panoramic views. The twin 135 HP Mercury outboard engines provide adequate power to handle Hawaii's waters on the occasional sunset cruise. The flat bottom design also drafts just 3' of water. The upper level of the two-story boat is a spacious living area with a master suite. The bedroom has wall-to-wall carpeting, built-in oak cabinets and walk-in his and hers closets. The large bathroom is tiled with a full shower, Raritan marine toilet with wastewater treatment system and a single sink. There is also a lovely Jacuzzi tub with a waterfall faucet. Outside the master stateroom, there is a laundry closed with a space saver GE washer and dryer. Down the stairs to the lower level, you'll find the family room, galley, dining area, breakfast bar, desk and library. As is evident from the photos, this main living area is spacious yet cozy and is perfect for full-time living or occasional entertaining. Your family or guests will enjoy the large screen TV, stereo system, 4-seater chaise-lounge sofa and the custom stained glass port holes. The galley is as nice as if not better and more spacious than many home kitchens in Hawaii. Appliances include a full-size residential GE refrigerator/freezer, stove/oven, and microwave along with ample tiled counter space and storage cupboards. Adjacent to the bright, open living area is a very generously proportioned guest quarters, separated by a submarine-style water-tight door. The guest stateroom consists of a stand alone double bed and a built in double berth/sofa with loads of built-in wood storage and a custom entertainment center. The guest cabin connects to the upper level and master suite via steel steps. At the top of the steps there is another spacious bathroom with an enclosed shower. From the aft deck, a ladder leads to the wide open and beautiful full roof deck. Underneath the exterior aft deck there is a large lazaret/workshop. Vessel Structure Details: She is a multi-compartmented, welded steel hull shell w/ steel, timber, ply-FRP decks and superstructure. Concrete ballasting is cast in the hull shells below the cabin/superstructure soles. Her electricity systems are 12v/120v/240v with shore power and a separate generator. She was designed to be self-sustaining with 12 solar electric panels and a solar water heater but can also be connected to shore power. The current owners are the first and only owners, who designed and built this truly unique yacht starting in 1994. It took four months to craft the hull out of steel, then another year and a half to perfect the interior. She was completed in 1997. Don Stoddard is the marine engineer/architect and builder.

2016 Wood Custom Penobscot 14

2016 Wood Custom Penobscot 14

$6,500

Norfolk, Virginia

Year 2016

Make Wood Custom

Model Penobscot 14

Category Tender Boats

Length 14'

Posted Over 1 Month

2016 Wood Custom Penobscot 14,Completed from scratch on 8 September by Pamola Boats. Not a kit. This boat is a Penobscot 14, designed by Arch Davis. The stringers and structure are Douglas Fir, the keel is white Oak, the hull is Hydrotek (meranti) plywood, and the trim, rails and seats are African Mahogany. The entire boat is encapsulated with three coats of epoxy. The inside has 5 layers of Flagship spar varnish and the outside has three layers high quality Interlux Brightside Polyurethane. All screws that remain in the hull are stainless steel. Oars are Douglas fir with mahogany stripes to match the boat. They have three layers of epoxy and 5 of varnish. The handles are bare wood threaded five times with linseed oil. They have leathers stitched to protect them from oar lock scarring. The transom is triple layered and has a removable notch to accept an outboard motor. The strip that runs along the bottom protects the keel, is sacrificial and easily replaced. I will also give you a thumb drive with all the pictures that I could find of the build. This is a virgin hull. It has never been in the water. This boat is a piece of art and is made to be beautiful. It is strong and functional but is not ment to be treated roughly. There is no trailer. I can get one from NorthernTool and put it together for you but there are many options out there for a boat this size. Text preferred. 361-44three-09one1 $6500

10' Wood/Fiberglass Boat, Blue & Gray

10' Wood/Fiberglass Boat, Blue & Gray

$900

Palm Coast, Florida

Year -

Make Custom

Model -

Category -

Length -

Posted Over 1 Month

10' wooden boat with fiberglass overlay. Cup holders, straps for securing dock lines. 5hp Suzuki outboard purchased new in 2001. Motor has always been flushed and washed with soap and water. Galvanized trailer with spare tire. Boat, motor and trailer have know known problems. All equipment is in very good condition. Boat just came back from the Florida keys on its trailer lobstering. Motor comes with extra impeller, spark plug, etc. boat also has spare paint for touch ups etc. Photos will show condition and style of boat.

1962 Aalsmeer Yacht Custom 57 (Dutch Built)

1962 Aalsmeer Yacht Custom 57 (Dutch Built)

$283,500

Port Ludlow, Washington

Category Cruiser

Length 57

Posted Over 1 Month

This vessel appears in very good condition. The owners are in the process of repairing the gunnels that need some attention, and there is a board in the main salon that is being replaced. The bright work is relatively current, with just a few areas that need minor attention. Stock #151765 Aalsmeer Yacht Inc./G.J. Dekker Design. Mid-cockpit, ocean going, full keel, teak decks. Perkins 6-cylinder, 354 cu. generator 8KW Onan This Dutch built Dekker design was built by the Aalsmeer Yachts, and is considered by some to be the Rolls Royce of sailing yachts. You can tell by looking that this beauty has been cared for by its owner as he sailed the Pacific. Previous owners brought it from Europe to the USA. This beauty is not unaccustomed to the high seas. The woodwork inside and out on this world class ketch is fabulous, and has been maintained very well by its 5 owners. Sail in comfort and entertain guests as you enjoy the spacious salon just forward of the galley, equipped with a 4-burner stove, stainless steel counter tops, a pull-out cutting boats, two ovens, a water maker, a large refrigerator, and a separate large freezer. Enjoy evening cocktails and cheese just above the galley in the spacious center cockpit. Sit in the cockpit under the stars or in the shade of the full canvas enclosure. The v-berth has its own head, with a pull-down sink. Two can sleep in the single berths. The master suite features beautiful wood finishes, lots of storage space, and it sleeps 3 in a single and double berth. Just forward of the master suite is a large shower and a separate shower. Reason for selling is aging owner.

2006 Custom 25 ft. Custom Wood Runabout Long IV

2006 Custom 25 ft. Custom Wood Runabout Long IV

$34,999

Cleveland, Tennessee

Category Powerboats

Length 25'

Posted Over 1 Month

2006 Custom 25 ft. Custom Wood Runabout Long IV, ***PRICE REDUCED*** Own a UNIQUE Classic Wood Construction, HAND MADE Repro 25 Foot Runabout! Interesting Trades Considered. One Owner Beautiful Classic Repro Mahogany 25 Foot Runabout. Classic styling with modern features. Powered by PCM 5.7 Fuel-Injected 330 Horsepower engine, this boat gives you the best of two worlds. To reduce maintenance and add durability, bottom of hull is covered with two (2) layers of biaxial fiberglass, and, anti-fouling bottom paint. This Retro built/look boat is complimented with an Aluminum "H" frame trailer custom fit to boat. Boat is Stored inside. A Full Length Custom Cover protects Boat when not in use. Don't Like Our Price?? - Serious Offers Considered. Call Tammy or Aaron @ Cleveland Boat Center for details. 423 478 BOAT (2628) 800 786 BOAT (2628)

Wood New deck table , made to match your boats color scheme.

Wood New deck table , made to match your boats color scheme.

$175

Orefield, Pennsylvania

Year -

Make Custom

Model -

Category -

Length -

Posted Over 1 Month

Folding deck table, folded hangs on a rail or easily stowed. Folded 4 inches high by 14 inches wide x 36 Inches long. Open, 16" high, 20 inches wide and 36 inches long. I will match your boat wood , oak, semi clear pine, maple , I can stain, or paint , I recommend poly coating for saltwater resistance. White Oak $175, maple, $160. Pine, $125. plus freight . $35.

SAILING ROWING DINGHY 11' Classic Wood Beauty Nice sail Sailboat Rowboat

SAILING ROWING DINGHY 11' Classic Wood Beauty Nice sail Sailboat Rowboat

$1,000

Las Vegas, Nevada

Year 2006

Make Custom

Model Dinghy

Category -

Length 11.0

Posted Over 1 Month

11 ft Sailing / row boat dinghy with a center board, rudder, and a sail rig including the sail. The sail is in excellent condition. 2 oarlocks and oars are mounted and included. This boat rows great! Similar to the Dyer Dhow. Unknown Make. Aft seat is missing. Good tender to tow, and provides sailing entertainment while in port. Similar to the dink, this is also a good starter sailboat for kids. 11'1" long 4'1" beam Wood hull 125+ pounds $400 Deposit within 24 hours of listing end. Deposit is only refundable, if upon personal inspection the dinghy does not meet buyer's expectations. Local delivery available for free within 30 miles of 89101. I will deliver it to Southern California (or within 300 miles) for $300 or Bay area (or within 500 miles) for $500. Delivery available within about 3-5 business days after payment in full. Free local pickup.