Lobster Boats for sale

1-8 of 8

Sort By

1981 JC 31

1981 JC 31

$44,000

Westerly, Rhode Island

Year 1981

Make JC

Model 31

Category Lobster Boats

Length 31

Posted Yesterday

Stock #233273 Beautiful Hybrid Fishing & Sailing JC Boat. Structurally Solid and Mechanically Sound If you are in the market for a lobster boat, look no further than this 1981 JC 31, just reduced to $44,000 (offers encouraged). This boat is located in Westerly, Rhode Island and is in good condition. She is also equipped with a Detroit Diesel engine.

1974 Harris 36

1974 Harris 36

$55,000

South Yarmouth, Massachusetts

Year 1974

Make Harris

Model 36

Category Lobster Boats

Length 36

Posted 2 Days Ago

Stock #209519 1974 36ft Harris with a 2005 353hp scania with 6400 hrs If you are in the market for a lobster boat, look no further than this 1974 Harris 36, priced right at $55,000 (offers encouraged). This vessel is located in South Yarmouth, Massachusetts. She is also equipped with a Scania engine.

1983 Eastport 24

1983 Eastport 24

$42,900

Wells, Maine

Year 1983

Make Eastport

Model 24

Category Lobster Boats

Length 24

Posted 1 Week Ago

According to the seller, this boat is virtually turnkey. We encourage all inquiries and questions relating to its present condition, the accuracy of details including but not limited to its location, engine hours, service history, listing status and features. Stock #187748 Excellent condition Eastporter! Low hours! Completely restored from top to bottom and well-maintained! New upgrades! What a nice picnic boat you have found in this Eastport 24 Downeast Style Boat. Best of all, this stout beauty was completely overhauled starting in 2010 and continuing for a couple of years before she was relaunched in the summer of 2012 According to the seller, he rebuilt the boat from the hull up, including all new structural components, new decks, new cabin, new steering system and new fuel system and electrical systems and the work appears to be very professionally done! All of the instruments are new including a FURUNO NAVnet 3D navigation system - GPS, Radar, Sounder, new bilge blower, new lighting, new forward cabin, new upholstery, new vents, new windows, new bilge pumps, new radios. This boat has been serviced in the fall, then shrink-wrapped and stored on the hard each year out of season then professionally commissioned each spring. Built in 1983 - Complete overhaul 2010 Check out the feature listing below: -Inboard Gas 250/180 HP -Heat Exchange Raw Water Cooling / Wet Exhaust -Borg Warner Transmission 1.5:1 -Sea Star Hydraulic Steering -27 Gallon Fuel Tank -Raw Water Wash Down System -FURUNO NAVnet 3D 12" GPS/Radar/Sounder Display, Model MFD 12 -Ethernet Hub-101 -FURUNO GPS -FURUNO Radar DRS6A (6kw) -FURUNO Sounder DFF1 BB -Dual VHF 1-Com radios -AM/FM Entertainment System -Forward and Aft Bilge Pumps -Cabin Heat -Spacious Forward Cabin Sleeps 2 Comfortably, -Plenty of Storage, -3 Air Hatches Reason for selling is seller and his family have shifted their focus to an inland vacation home.

1982 Custom Cape Islander 20

1982 Custom Cape Islander 20

$22,000

St-Zotique, Quebec

Year 1982

Make Custom

Model Cape Islander 20

Category Lobster Boats

Length 20

Posted 2 Weeks Ago

Seller states that all electronics including solar panel and battery chargers were in good working conditions. The engine would need a good tune-up. Seller states it is still working well but explained he would have likely replaced it within the next two seasons if he kept the boat. Stock #234454 Unique Cape Islander boat! Restored over the last three years. This is your opportunity to own one of the rare smaller Cape Islander models. This sturdy little boat still offers a spacious cabin to welcome up to 8 guests comfortably. This little fishing boat can handle rough weather due to its higher-profile and unique hull design. This particular Cape Islander was built by Cabot Fiberglass in Ontario, Canada in 1982. The current owner purchased her 15 years ago and kept her well maintained. The current owner also spent considerable time in the last 3 years to refit and upgrade the cabin and cockpit. The boat features an integrated ice chest, coolers, multiple storages for tackle boxes, a porta-potty, VHF radio, GPS/fishfinder combo, depth sounder, multiple work lights, and search lights. This is truly the perfect fishing boat for the serious fisherman looking to exercise their passion in the most demanding environments. Ideal to fish on bigger lakes and especially earlier or later in the season. Reason for selling is not using anymore.

1996 Nauset 42

1996 Nauset 42

$161,000

Marshfield, Massachusetts

Year 1996

Make Nauset

Model 42

Category Lobster Boats

Length 42

Posted 3 Weeks Ago

According to the Seller, this is a workboat, but she is not fished commercially. He bought her for his kids, and they do some lobstering and tuna fishing. Everything works on the boat. The engine has never been overhauled, but it does have a new turbo that was installed in 2014. Stock #024972 Solid glass, high reliability and a boat load of fishing fun! If you are in the market for a lobster boat, look no further than this 1996 Nauset 42, just reduced to $161,000 (offers encouraged). This vessel is located in Brant Rock, Massachusetts and is in good condition. She is also equipped with a Cummins engine that has 7,900 hours.

1975 Robert Rich 46

1975 Robert Rich 46

$44,900

Cushing, Maine

Year 1975

Make Robert Rich

Model 46

Category Lobster Boats

Length 46

Posted 3 Weeks Ago

Seller says this boat is is good working order and ready to go fishing. No galley, or head, but she does have 4 berths in the bow. Boat will need new batteries and one local yard recommended installing a new tube on the propshaft.. Stock #064976 Lobster boat and barges if you want them ...ready to go to work This is a very nice lobster boat built by the venerable Robert Rich. She is constructed of West System Epoxy over 1.5" cedar planking on white oak frames. She has bronze fasteners. Her Detroit 8v71 Engine has been recently rebuilt and has 0 hours on it. Vessel features: -Full enclosed cabin with 4 bunks -Jib crane and boom. -Closed stern -Hydraulic Pot hauler -GPS Top speed is 14 Knots. The seller will entertain any reasonable offer. This seller also has two lobster push barges for sale that can be purchased as part of a package; one 20' x 52' corten steel barge in very good condition and a 16 'x 40' steel barge in good condition.

1986 Duffy 35

1986 Duffy 35

$150,000

Saco, Maine

Year 1986

Make Duffy

Model 35

Category Lobster Boats

Length 35

Posted 3 Weeks Ago

According to the seller this boat is ready to be fished this season. Her 3208 Cat has new injectors and the valves were recently adjusted. Her transmission is a twin disc 506 that was recently serviced and she has a new live well pump. The boat is always stored inside during the off season. Stock #100494 Great shape! Ready to fish! Tuna, Lobster or Harpoon...she has it all Update January 2020: Seller has an extensive list of new electronics and fishing gear that are available separately for $20K. Some of this equipment may be in the pictures but not included in the current asking price. You won't find another Duffy quite like this one, she's got a fiberglass molded cabin, all new wiring within the last 10 years and much more. She has been stored inside since 2008. This boat was set up with multiple redundant systems by her current owner. He hates to see her go, but injuries prevent him from fishing any longer. The Duffy 35 has a very attractive profile with a pronounced sheer which is three feet above the water at the stern, dips slightly lower along the cockpit and then rises to more than five feet above the water at the bow. The beam is noticeably narrower at the transom than amidships and the slight tumblehome (sides that turn in at the deck rather than flare out) at the transom of the Duffy 35 is typical of the graceful, traditional Downeast workboat style. This Dufffy is very special, since she is rigged for tuna fishing, lobstering or harpoon fishing The electronics included in the current price are listed below . -1 vhf radio - Depth Sounder The following equipment and features are included at the current (2020) list price: -4 swivel rod holders -cage - inverter - stereo - new compass - batteries - sound down insulated motor box - new wet exhaust - molded cabin - v berths - 1.5 inch washdown Jabsco pump - tuna door - tuna fighting station - reinforced stern - controls and helm -new stuffing boxes -new fuel tanks , 2 x 125 gls She cruises at 15 kts at 2100 rpm and will do 24 kts at full throttle. Seller will consider a 25-28' inboard center console in partial trade for this boat. Reason for selling is seller is downsizing.

2006 Newton 46

2006 Newton 46

$424,900

Islamorada, Florida

Year 2006

Make Newton

Model 46

Category Lobster Boats

Length 46

Posted 1 Month Ago

Refitted and purpose built for safety first, functionality and usability. It is ready to pull traps, dive or fish. Captain can stay cool in air conditioned cabin and all radar and GPS systems are new. LOOK AT THE ENGINE !!!!!!!! Second station is set up with multiple VHF and Radar/GPS. Night time is illuminated with LED spots everywhere. Stock #218423 2006 NEWTON 46 COMMERCIAL PILOTHOUSE TRAWLER LOBSTER,CRAB, CHARTER FISHING OR DIVE BOAT. COMPLETELY REFITTED INSIDE AND OUT Super clean Newton 46 with awesome 700HP Lugger, single screw, top of the line 24 litre diesel. Smartly set up up as this boat can pull lobster traps without crowding the middle of the boat. Massive water flow capability to keep Crab and Lobster alive and healthy while working long hours. State of the art electronics that have only been used to validate installation. Owner was adding to his fleet of Lobster boats and refitted everything with triple redundancies. Multiple VHF and GPS. So many custom features including engine cover, trap capture mechanism, tower seating and cover. Has everything needed to be a working boat whether Charter fishing, Lobster or off shore dive. Safety first -6 person life raft, E-Pirb and high-flow bilge pumps Reason for selling is owns three lobster boats - re engineering business and processes.