Trawler boats for sale in Florida

1-8 of 8

Sort By

1997 Lotus Trawler 52 Trawler

1997 Lotus Trawler 52 Trawler

$64,900

Alva, Florida

Year 1997

Make Lotus Trawler

Model 52 Trawler

Category Trawlers

Length 52

Posted Over 1 Month

The boat is listed as being a project, however it has great potential. As seen in the photos there is some minor surface rust, however the seller states the hull is structurally sound. The outdrives look to be in good operational condition and show no damage. The cabin is cluttered but shows no excessive wear and tear. The helm looks neat and functional. The bridge will need the arch installed and the deck could use new paint. The forward head needs cosmetic work. The interior needs some light cleaning and cosmetic repairs. We have not inspected the boat and recommends checking the boat for yourself or to hire a surveyor to verify the condition. Stock #391157 ***SALE PENDING*** Steel Hull Trawler!!! Has Great Potential!!! ***Please see the detailed video*** This Lotus Trawler 52 is a great shallow water boat. Is has been used most of its life in freshwater on the Great Lakes. The boat drafts 3'6" making it ideal for cruising where most boats its size cannot reach. The rugged all steel hull has a centerline keel for stability and to protect the outdrives from grounding. The stern of the hull flattens out providing an extra stabile platform. The boat is currently on the hard but was just motored down the waterway 50 miles to its current boatyard a few weeks ago. The boat has twin 2018 Volvo Penta D4 diesel engines matched with Volvo Penta Duo-prop outdrives. The engine room is located beneath the steps in the stern. With the 18-foot beam, there is plenty of room inside. A covered overhang from the massive upper deck surrounds the cabin, providing protection from rain and shade. A large auxiliary tank is mounted on the bow for extra fuel storage. The spacious cabin has plenty of windows and a sliding glass door to the aft, for easy entry. The helm is well laid out. The captain has twin Volvo Penta engine control LCD screens, a VHF, and a large Garmin 12" MFD overhead with radar. The boat has autopilot and electric steering. There are two cabins and two heads below. For convenience, there is an onboard washer/dryer. Three solar panels have been installed, and two new panels are still in boxes. The Kubota 11 kW generator provides plenty of power for all your electrical needs.

1988 Steel Trawler Fishing Vessel

1988 Steel Trawler Fishing Vessel

$375

Cape Canaveral, Florida

Year 1988

Make Steel Trawler

Model Fishing Vessel

Category Commercial Boats

Length 116'

Posted Over 1 Month

1988 Steel Trawler Fishing Vessel Vessel Description TS-887   Call for more information :  321-784-5982     Size:  Length:   38 m   Breadth: 10m    Wide: 6  , Year : 1988  Construction:  Steel   Design: Shrimper Trawler   Engine: Deutz   SBV 6M62,  1200 BHP @ 750 RPM,  Gear :  Reintjes  Val 1840/3 Propellers  Lips,  Auxiliary Engines:  Caterpillar 3406 DIT   176 KW @ 1800 RPM     Fuel :  77.62 ton    Water:  23.54 ton,  Fish Hold:  200.00 m3,  Speed: 12 knots, Gross Ton :  552.39 ton      Equipment:   Radar A  JRC Color Radar, Radar B R121 o XX Rostter Scan,  Sounder  Suzuki ES 5300 Color,  VHF,  Talk Back system, LoranC, GPS, Radio Ray 150 SSB,  Color Plotter JRC NOW 51,  and More,  Miscellaneous:  Freezer boat, Winch  Windlass Norskov Laursen 625 HE,  Capstan  Norlav 6000,  Lifeboat Cador-Mat-Enc, Liferaft 2 for 20 persons,   Accommodation 15 bunks, Galley and Full kitchen, Full Bathroom.   Fotos are recent.   Vessel working conditions and is ready to Go   Price :  $475,000.  AMAZING DEAL JUST REDUCED TO $375,000  Sister Vessel is also available for an amazing DUO deal !!!!!!

1988 Steel Trawler Fishing Vessel

1988 Steel Trawler Fishing Vessel

$375

Cape Canaveral, Florida

Year 1988

Make Steel Trawler

Model Fishing Vessel

Category Commercial Boats

Length 116'

Posted Over 1 Month

1988 Steel Trawler Fishing Vessel Vessel Description TS-887   Call for more information :  321-784-5982     Size:  Length:   38 m   Breadth: 10m    Wide: 6  , Year : 1988  Construction:  Steel   Design: Shrimper Trawler   Engine: Deutz   SBV 6M62,  1200 BHP @ 750 RPM,  Gear :  Reintjes  Val 1840/3 Propellers  Lips,  Auxiliary Engines:  Caterpillar 3406 DIT   176 KW @ 1800 RPM     Fuel :  77.62 ton    Water:  23.54 ton,  Fish Hold:  200.00 m3,  Speed: 12 knots, Gross Ton :  552.39 ton      Equipment:   Radar A  JRC Color Radar, Radar B R121 o XX Rostter Scan,  Sounder  Suzuki ES 5300 Color,  VHF,  Talk Back system, LoranC, GPS, Radio Ray 150 SSB,  Color Plotter JRC NOW 51,  and More,  Miscellaneous:  Freezer boat, Winch  Windlass Norskov Laursen 625 HE,  Capstan  Norlav 6000,  Lifeboat Cador-Mat-Enc, Liferaft 2 for 20 persons,   Accommodation 15 bunks, Galley and Full kitchen, Full Bathroom.   Fotos are recent.   Vessel working conditions and is ready to Go   Price :  $475,000.  AMAZING DEAL JUST REDUCED TO $375,000  Sister Vessel is also available for an amazing DUO deal !!!!!!

1979 Custom Trawler Motor Yacht

1979 Custom Trawler Motor Yacht

$419,000

Jupiter, Florida

Year 1979

Make Custom Trawler

Model Motor Yacht

Category Motor Yachts

Length 65'

Posted Over 1 Month

1979 Custom Trawler Motor Yacht Major 2000 refit by Hinckley  This magnificent no-nonsense custom trawler motor yacht is in excellent condition and is actively cruised.  Designed by naval architect William Barrows for his own use and strongly built by the custom shop at Willard.  She was purchased in 1989 by her second owner and underwent a major refit in 2000 by Hinckley in Southwest Harbor, Maine that included new engines and transmissions, new teak decks, brightwork, new windows, full paint below and above water and new heavy lift crane to mention a few of many upgrades.  This wonderful sea boat is now on her third owner who actively cruises her between Maine and the Bahamas.Call Eddie Wimbrow for more information and personal [email protected]

1976 Garren Blakely Trawler 50 Trawler

1976 Garren Blakely Trawler 50 Trawler

$189,500

Daytona Beach, Florida

Year 1976

Make Garren Blakely Trawler

Model 50 Trawler

Category Motor Yachts

Length 50'

Posted Over 1 Month

1976 Garren Blakely Trawler 50 Trawler This beautiful ,proven coastal cruiser has just returned from an epic journey from Guatemala, after cruising from Washinton to Alaska, Vancouver BC, then through the Panama Canal,she is currently resting in Daytona Beach, Florida awaiting someone to take her on her next adventure. A fantastic live aboard, with all of the comforts and amenities for full time cruising.

1989 Trawler 57'

1989 Trawler 57'

$186,410

Miami, Florida

Year 1989

Make Trawler

Model 57'

Category Powerboats

Length 57'

Posted Over 1 Month

1989 Trawler 57' TRAWLER 57' 2 INBOARD CUMMINS ENGINES 6 BTA 6 CYLINDERS WITH AROUND 800 HOURS WITH 3,000 LITERS CAPACITY. KITCHEN, LIVING ROOM, FLYBRIDGE

2003 Custom Trawler 52

2003 Custom Trawler 52

$415,000

Fort Lauderdale, Florida

Year 2003

Make Custom Trawler

Model 52

Category Powerboats

Length 52'

Posted Over 1 Month

2003 Custom Trawler 52 This trawler, Brazilian Custom Made 2003, is the only in her class and year in the US waters! It was relocated from Brazil to Tampa, Florida and is in excellent shape. Ready to be sold!

2000 Wendon Trawler Pilothouse

2000 Wendon Trawler Pilothouse

$249,000

Dania Beach, Florida

Year 2000

Make Wendon Trawler

Model Pilothouse

Category Powerboats

Length 48'

Posted Over 1 Month

2000 Wendon Trawler Pilothouse She has low hours on Caterpillar 3126’s and fresh bottom paint. The success of any company depends on a number of factors. In the case of Wendon Manufacturing, the ultimate success is centered about the Founder and President, Mr. Al Owen.  Wendon is now thirteen years old, as it was established in 1991 as a division of Weldco Beales Manufacturing Ltd. The initial plant at Canoe Cove in Sidney, B.C., manufactured one fiberglass yacht at a time. Many of the staff at Wendon have up to twenty-five years experience in the industry. The unparalleled quality of construction in all phases of the manufacturing process is a reflection of their skills. Every employee has a deep love and respect for boats, and each derives satisfaction from building something of beauty and function.