- 16 X 40 Floating Cottage (2)
- 20 X 37 Floating Cottage (2)
- 50 (2)
- Dinghy (2)
- Landing Craft (2)
- 12 X 40 Floating Cottage 493sqft (1)
- 14.5 X 31 Floating Cottage 450sqft (1)
- 15 X 30 Floating Cottage 450sqft (1)
- 16 X 30 Floating Cottage 480sqft (1)
- 16 X 32 Floating Home (1)
- 17 X 20 Floating Cottage 373sqft (1)
- 18 CC (1)
- 24 X 36 Floating Cottage (1088sqft) (1)
- 25 Center Console (1)
- 41 (1)
- 45 (1)
- 450 Sqft Floating Cottage (1)
- 50 BRIER ISLAND (1)
- 73 (1)
- 8 X 12 (1)
- Aluminum Workboat (1)
- Catamaran (1)
- Chesapeake Oyster Bay (1)
- Farrier Marine F82R (1)
- John Spencer 52 (1)
- Ketch (1)
- Modified Adirondack Guide Boat (1)
- Monk 46 (1)
- Picaroon II (1)
- Power Cat (1)
- STEVENS Boat V-Drive 17 Drag Boat (1)
- Samson 60 (1)
- West Bay Cruiser (1)
Custom Built boats for sale
1-15 of 44
Pine Lake, GeorgiaFeatured
Category Antique And Classic Boats
Posted Over 1 Month
Classic, never used with custom finish of clear fiberglass, 3 coats of spar varnish and 4 coats of Johnson paste wax Adirondack Guide Boat. Was the hit of an Atlanta Art Show and then stored in warehouse. Hull and Bottom Alaskan Yellow Cedar, Western Red Cedar. No inner ribs, Sleek, Fast and Stable. Modified to have a motor transom. Seats Solid cherry and rattan. 80 Pounds Capacity: 2 Adults, 1 young adult
Bay St Louis, Mississippi
This 41' cutter is cruise and live aboard ready. Bow to stern she is reported to be and appears to be in good working condition. All mechanical and electrical components are stated to be in working order with the exception of the refrigerator which needs a compressor. Owner reports engine rebuilt in 2015 including re-boring block to .025, pistons, rods and crank bearings. Receipts available on this rebuild. Stock #174606 See the World! This Custom Built 41' Cutter is designed for comfort and performance ~ Hit the Blue Water Today! If you are in the market for a cutter, look no further than this 1978 Custom Built 41, priced right at $27,800 (offers encouraged). This vessel is located in Bay Saint Louis, Missouri and is in good condition. She is also equipped with a Vetus engine that has only 95 hours. Reason for selling is going with something smaller that can be handled more easily by one person..
Morro Bay, California
Per the seller: "She needs cosmetic TLC but is super sturdy and sea-worthy. Without a doubt totally one-of-a-kind vessel. Engine info: Per the seller - "The engine does turn-over fine, but we're having trouble getting her to start. Just haven't had the time to look at it yet. I suspect it's the plugs or fuel injector." The ship is completely unique, hand-built replica of The Spray, famously first single-handed circumnavigation of the globe by Joshua Slocum in 1895-1898. Much love and energy poured into her over the years. Rigging lines will need to be replaced; the engine needs repair. 40K estimated If finished she'd likely bring in 100k+. Upwards of 150k. $90,000 into her and between my partner and I. Thousands of man hours to build her. Its hard to let her go but its best to keep moving forward in life. And be thankful for the experience of learning and creating. As for survey reports, I don't have any on file although she was inspected and passed by Morro Bay Harbor Patrol/Coast Guard to receive a live aboard permit two years ago." She has last hauled out about five years ago so she will need a good bottom cleaning. All through hull valves and fittings were replaced at this time as well as shaft replaced. And bottom painted. NOTE From seller on boat's history --- "The Brier Island was built by hand finished in the year 1976 by Bob White out of Los Osos California. The Hull is built of steam bent Oak ribs wrapped in 1 1/2" Old growth Douglas fir I believe. She has a full keel about 6" thick that I believe is fir as well. The rudder fallows the keel back perhaps 3 x 4 ft with the tiller above deck made of Steele. All the hull fittings were of hot dipped galvanized Steele which so far as I've seen have held up rather well. The entire hull was wrapped in fiberglass at some point. The deck is 3/4" ply covered by 3/4" fir strips wrapped in fiberglass. The fore mast is Doug fir while the aft mast is port Orford cedar. The sail material is canvas sealed with deck stain. I acquired the Island in 2008 where apparently she had been sitting for twenty years. The hull was empty except for the engine and a cot. I rebuilt the cabins a a section of deck that had some rot and with a friend from the San Francisco Maritime Museum, Steve Conklin, devised and hand made all the rigging and mast. And hand shaped and stitched the sails. Replaced the bulwarks with Steele stanchions and Doug fir rails. And fit the bowsprit with a pivoting bolt. We constructed a cage behind the aft cabin to fit the sheet to secured to the frame. I built simple quarters below deck with a bed and small office in the bow and a small galley with about 5'10" of head room. A sink and Coleman stove with cupboards below. Room to seat four at the table with another bunk behind the table. Midship is a port where the fish hold was at one time. Now there sits two fifty gallon tanks with racor filters and two storage lockers. The aft cabin is lined with seating/ storage with two bunks behind-and under the deck. A small bucket bathroom and battery locker for the solar panels are in there as well. The Perkins diesel sits to the rear with a hydraulic transmission that runs the prop. It can be setup to run the windlass as well. Behind the engine are two storage compartments/ engine room. There are two bilge pumps and a CB radio in the cabin and a depth sounder above deck at the helm" Stock #144644 Very Unique ONE-of-a-kind, hand-built replica of the "Spray" famously first singlehandled circumanvigation of the globe by Joshua Slocum in 1895-1898. If you are in the market for a yawl, look no further than this 1976 Custom Built 50 BRIER ISLAND, priced right at $44,500 (offers encouraged). This vessel is located in Morro Bay, California and is in decent condition. She is also equipped with a Perkins engine.
Port Orchard, Washington
The transom is in need of repair, showing soft spots. The hull is in need of scraping. After a recent survey, it appears that the repairs to the original and cracked bent oak frames (sister frames were added) will need work. The engines fired right up when cold and seemed to run strong. The interior is clean and nice, and appears to have been well taken care of. Stock #157299 Classic Ed Monk designed Flybridge Sedan Trawler, custom built by West Bay Boat Works in Sequim, WA. If you are in the market for a trawler, look no further than this 1967 Custom Built Monk 46, just reduced to $27,500 (offers encouraged). This vessel is located in Port Orchard, Washington and is in decent condition. She is also equipped with twin Detroit Diesel engines.
Category Sloop Sailboats
Posted 5 Days Ago
This 1981 Custom Built John Spencer is currently on the hard. She is being sold "as is." Work we know needs to be done: The headliner has to be put in. The wood around the rudder post has to be replaced. Some minor fiberglass/woodwork in the cockpit. The rig should be painted. The dinette and sofa upholstery is a little worn. Stock #175602 Boat is a cold-molded boat built in 1982 in New Zealand by the company of Yotsports. If you are in the market for a sloop, look no further than this 1981 Custom Built John Spencer 52, just reduced to $35,000 (offers encouraged). This vessel is located in Ventura, California and is in good condition. She is also equipped with a Yanmar engine. Reason for selling is buying a home.
The boat is very well kept as you can see from the photos, fresh paint everywhere. There is minimal corrosion in the aft hold and the main center hold has been freshly painted. Everything works as designed; this boat is ready to make some $$ Stock #152673 Set up for double rigs & skimming with all hydraulic winches! Kubota light plant! Beautiful wood interior! If you are in the market for a shrimp boat, look no further than this 1984 Custom Built 50, just reduced to $149,500 (offers encouraged). This vessel is located in Chauvin, Louisiana and is in great condition. She is also equipped with a Detroit Diesel engine that has 3,500 hours. Reason for selling is not enough time.
This ketch appears to be in great condition and has been kept well by its owner. The engine aboard is a Lehman 135 and was last serviced October 2018 with a major service. New batteries and battery switch were installed at the same time. Stock #155908 READY TO GO FOR YOUR NEXT LONG RANGE TRIP! LEHMAN FORD INBOARD 135HP ENGINE WITH 220 HOURS! IF YOUR NOT INTO LONG RANGE THEN MAKE HER A LIVE ABOARD!!! If you are in the market for a ketch, look no further than this 1973 Custom Built Samson 60, priced right at $143,400 (offers encouraged). This vessel is located in Wilmington, California and is in great condition. She is also equipped with a Lehman engine that has only 220 hours.
New Orleans, Louisiana
The wood hull from the Keel to the Rub Rail has been glassed over and is in good condition. One of the two generators is in good working condition; the condition the other is unknown. Below due to previous water damage, the staterooms aft of the engine room are project status and in need of restoration. Stock #181966 A 73' Piece of History ~ Elegant ~ Regal ~ Step Aboard & Step back in Time! If you are in the market for an antique and classic boat, look no further than this 1929 Custom Built Commuter Yacht 73, priced right at $144,500 (offers encouraged). This vessel is located in New Orleans, Louisiana and is in need of some work. She is also equipped with twin Detroit Diesel engines. Reason for selling is health issues prevent completion of her restoration.
Seller remarks that this 1982 50' Custom Built Trimaran needs the expected TLC that new owners would like to do as personal preferences. The boat needs cleaning, exterior and interior. The boat needs re-masting and rigging. The head needs repair or replaced. There is no generator but room for it. Stock #173601 Great condition custom built trimaran! Plenty of storage space! Ready to come aboard today! If you are in the market for a trimaran, look no further than this 1982 Custom Built 50, just reduced to $65,000 (offers encouraged). This vessel is located in Alva, Florida and is in need of some work. She is also equipped with twin Honda engines. Reason for selling is no time.
Category High Performance Boats
Posted 2 Weeks Ago
Runs and drives excellent. Recent receipts for $1K in updated service. Idles smooth and ROARS to life! Listen to attached video! Per the Seller: Certified marine did the service and we have receipts of what was completed! Stock #175077 Rare find! Stevens engineered Hall drag boat! Low hours! Ready to hit the water today! If you are in the market for a high performance boat, look no further than this 1978 Custom Built STEVENS Boat V-Drive 17 Drag Boat, just reduced to $10,000 (offers encouraged). This boat is located in Valrico, Florida and is in great condition. She is also equipped with a Oldsmobile engine that has only 99 hours. Reason for selling is no longer use..
Posted 2 Weeks Ago
The boat has not been in use since 2015. She is wrapped and in storage. Per the seller: could benefit from a fresh coat of exterior paint, as her UV paint is showing signs of age. She will need just minor TLC to get her back to her glory. The motor is reportedly regularly started and run to make sure operational for the next happy owner. When folded, only 8 feet 3 inches wide! Stock #179898 27 ft. folding trimaran. Rear cockpit design. 37 ft. aluminum rotating wing mast. Roller furling boom w/ interior outhaul. Trailer included! ********************** CERTIFIED SINGLE OWNER ********************** If you are in the market for a trimaran, look no further than this 2007 Custom Built Farrier Marine F82R, just reduced to $54,499 (offers encouraged). This sailboat is located in Boise, Idaho and is in decent condition. She is also equipped with a Honda engine that has 300 hours. Reason for selling is health.
The boat has been lovingly maintained by the owner/builder and looks as good as new. The Evinrude has only 600 hours and has seen annual maintenance of filters and plugs which will produce many more years of use. Stock #132980 Will consider all offers. Classic custom built center console lovingly maintained by the builder If you are in the market for a center console, look no further than this 2007 Custom Built 18 CC, just reduced to $17,700 (offers encouraged). This boat is located in Westport, Massachusetts and is in great condition. She is also equipped with a Evinrude engine that has 600 hours. Reason for selling is time for the next project.
Newly constructed this vessel is ready to go. Stock #020638 New construction, never in service, dinner cruiser or houseboat conversion! If you are in the market for a houseboat, look no further than this 2008 Custom Built Catamaran, just reduced to $145,000 (offers encouraged). This vessel is located in Bay Point, California and is in need of some work. She is also equipped with twin Volvo Penta engines that have only 50 hours.
National City, Michigan
Category Center Consoles
Posted 1 Month Ago
*** Update December 2015 *** Before this fishing machine was put into storage this year, the owner had an additional fuel tank professionally installed. That extra 40 gallons brings your total fuel capacity to 75 gallons meaning a lot more time on the water without needing to refuel. Stock #058483 A Gorgeous Fishing Machine, Virtually a new boat as of 2013! Only 8 hours on the Rebuilt engine. If you are in the market for a center console, look no further than this 2013 Custom Built 25 Center Console, just reduced to $19,500 (offers encouraged). This boat is located in National City, Michigan and is in great condition. She is also equipped with a Johnson engine that has only 8 hours.
As reported by the owner, this vessel is fully operational. The deck expansion and cosmetic work should be completed soon. The work will all be glassed in. The boat was hauled for a cleaning and bottom job, in early 2015. Stock #099775 Loaded and ready to go! If you are in the market for a shrimp boat, look no further than this 1986 Custom Built 45, priced right at $83,400 (offers encouraged). This vessel is located in Apalachicola, Florida and is in decent condition. She is also equipped with a Cummins engine. Reason for selling is looking to get into a larger boat..