Steel Boat Boats for sale

1994 Corten Steel 20' x 52' Barge

$45,000

Thomaston, Maine

Year 1994

Make Corten Steel

Model 20' X 52' Barge

Category Barge

Length 52

Posted Over 1 Month

The barge is currently stored on land and will need considerable repairs prior to a launch Stock #064981 Barge project that might be of use after you've made repairs For sale is a steel 20' x 52' lobstermans push barge. It is a single wall fuel hauling tank that would handle 9000 gallons of diesel and 7000 gallons of gas. They cannot be used for that purpose under the current regulations. It has no engine and is strictly a push barge. This 4' deep barge previously transported bait, gasoline and diesel fuel to the offshore island lobstering grounds. Vessel can no longer haul fuel since it has only a single hull and cannot be certified to haul fuels. The Seller will consider any reasonable offer. This seller also has a 46' Robert Rich lobster boat and another push barge for sale that can be purchased as part of a package. Reason for selling is no longer using them.

1992 Corten Steel 16x40 Little Dipper

$23,000

Thomaston, Maine

Year 1992

Make Corten Steel

Model 16x40 Little Dipper

Category Barge

Length 40

Posted Over 1 Month

The barge is currently stored on land and will need considerable repairs prior to a launch Stock #062883 Barge project that might be of use after you've made repairs For sale is a Corten steel 16' x 40' lobstermans push barge that is 4' deep. It is a single wall fuel hauling tank that would handle 8000 gallons of diesel and 4000 gallons of gas. They cannot be used for that purpose under the current regulations. It is on the hard and needs repairs before it can be relaunched. It has no engine and is strictly a push barge. This 4' deep barge previously transported bait, gasoline and diesel fuel to the offshore island lobstering grounds. Vessel can no longer haul fuel since it has only a single hull and cannot be certified to haul fuels. The Seller will consider any reasonable offer. This seller also has a 46' Robert Rich lobster boat and another push barge for sale that can be purchased as part of a package. Reason for selling is no longer using them.

2020 Hydrohoist 4400UL2

$5,495

Holiday, Florida

Negotiable

Year 2020

Make Hydrohoist

Model 4400UL2

Category Boat Trailers

Length 24

Posted Over 1 Month

Boat Lift Hydrohoist 4400UL2 Product Features: • All steel above the waterline. • Precision design & custom molded polyethylene tanks • Full width 4″ frame channel with 3″ adjustable expansion channel • Heavy-duty 1/4″ torsion bars • 5″ high-density polypropylene square hole bushings • Heavy-duty hull system • Grade-8 pivot hardware • Structural grade dock brackets with molded bumper guards • Two-piece stainless/polyethylene pitman bushings • Padded step pitmans Model: 4400UL Min. Water Depth: 4* ft / 1.22 m Min. Slip Width: 8 ft / 2.43 m Max. Slip Width: 16 ft / 4.87m Custom molded, high impact, polyethylene tanks (highly resistant to impact and low water damage) • Steel parts above water • Heavy-duty ¼” thick torsion bars and hull support system. • Grade 8 pivot hardware. • Cast parts are high-strength, low alloy steel making them 40% stronger than fabricated steel. • User friendly push button control units. • Hydroguard Bumpers provided to prevent damage to boat when loading.

1986 Commercial Shrimp 82 IQF

$273,000

Port St Joe, Florida

Year 1986

Make Commercial

Model Shrimp 82 IQF

Category Shrimp Boat

Length 82

Posted Over 1 Month

This Custom Shrimp 82 IQF boat is currently in operation shrimping the Gulf of Mexico. It operates under a current USCG Document and Fishery Endorsement. The sellers have owned the boat for about 20 years and are preparing to retire. The engine and generator hours are unknown. Many updates to the boat include the bridge computer system and monitors, the aluminum drag boards, and central air conditioning. Stock #380830 82' Shrimp Boat with IQF freezer, rigging and aluminum drag boards included, 21' x 27' working deck. Caterpillar 3408 power. Commercial Shrimp Boat Opportunity! Add the boat to your fleet or start a new venture. This 82' steel Shrimp Boat is currently in use as a commercial shrimper under its USCG Fishery endorsement. The sellers have owned and managed the boat for about 20 years shrimping the Gulf of Mexico. The boat produces $160,000 in annual revenue for the owners. The working deck of this boat is 27' from the stern to the winches. The aftmost deck is 21' wide by 18' to the containment deck. The decks are steel, the containment barrier is stainless steel, and the gunwale rails are stainless steel. The boat's USCG NRT is rated for 56 tons. On the business end of the ship, the brine box is 8' x 4' x 3.5'. Below the brine box is the hatch to the IQF freezing unit which holds an estimated 40,000 lbs of catch. Net and outrigger operations are managed by the PTO-driven McElroy double winch and the electric trynet winch. The owner recently added four custom aluminum drag boards, see photos. The pilothouse incorporates a 15' x 12' galley with U-shaped seating for the whole crew. There is a stove, refrigerator, freezer, sinks, and microwave that are installed and in use. Behind the galley are two separate bunkrooms with 4 total bunks and a head with a shower between them. The bridge looks over an open foredeck with access to the forward bollard, freshwater fill, and anchor. On the bridge are Furuno radar, VHF communications, a hailing unit, and an autopilot. The certified 6-person liferaft is on the pilothouse roof. The ship is powered by a Caterpillar 3408 diesel engine which also powers the PTO-driven McElroy winches. Available fuel is 10,000 gallons. Don't let this one get away! Call or email with questions, or make an offer to hold the Shrimp 82! Reason for selling is retiring.

1993 Rodriguez 78

$450,000

Biloxi, Mississippi

Year 1993

Make Rodriguez

Model 78

Category Shrimp Boat

Length 78

Posted Over 1 Month

The condition of the vessel and its features are as expected for an almost thirty year old boat. The owner has kept all maintenance as scheduled and upgraded many of the instruments. This is a ready to shrimp vessel. Stock #328533 This needs to go, ready to work today, one of a kind. This 1993 Rodriguez 78-foot Shrimp boat, constructed in Bayou la Batre, Alabama is ready to hit the deep water. It is fueled by a Caterpillar 3412 540 horsepower diesel inboard motor. The steel hull is solid as it can be. At seventy-eight feet, it has the length your crew would want in a shrimp rigger. It has two cabins, one with two bunk beds and one captain's suite. The bridge has many updated instruments for your navigation needs. The trawling nets are in great condition and as stated ready to go. The trawlers are in very good shape as is the deck gear. Reason for selling is just getting out of the shrimp business.

1996 J and J Boat Builders Shrimp Trawler

$1,171,500

Bayou La Batre, Alabama

Year 1996

Make J And J Boat Builders

Model Shrimp Trawler

Category Shrimp Boat

Length 90

Posted Over 1 Month

The condition of this 1996 shrimp trawler is very good and well taken care of. Everything works as it should and is ready for immediate shrimping. Vessel was last dry docked in 2021 at Jemison Shipyard for routine maintenance. Stock #309667 This is a GREAT Opportunity. This is ready to Rock and Roll and hit the high Seas. Shrimp here we come. This custom-built shrimp trawler is ready to go out now. Vessel was built of all welded steel construction by J & J Marine, Inc at Bayou LaBatre, Alabama during 1996. The boat is a typical twin-screw refrigerated double rigged trawler. The wheelhouse contains many navigation and other equipment. On top the wheel house or in the rigging are radar scanners, many lights, and antennas. The cabin is located forward of the wheelhouse. Located aft of cabin is the galley and dinning area. located aft from those areas is a 4-man bunkroom with built in locker and bunk drawers. Be sure to check out the trawling gear included as well. There have been very few newly constructed trawlers for the Gulf of Mexico since 2002. This custom-built shrimp trawler is ready to go out now. Reason for selling is retiring.

1986 Rodriguez 81

$450,000

Biloxi, Mississippi

Year 1986

Make Rodriguez

Model 81

Category Shrimp Boat

Length 81

Posted Over 1 Month

The 1986 Rodriguez 81 shows no signs of leaks and hull damage. The seller says everything works as it should and maintenance has been kept up with. The Cummins generator engine was just bought last year. Stock #387309 This custom built Rodriquez trawler is ready for shrimping. This is a one of a kind, built in famous Bayou le Batre. This 1986 Rodriguez 81 shrimp boat, constructed in Bayou la Batre, Alabama is ready to hit the deep water. It is fueled by a Cummins KTA 1150 470 horsepower diesel inboard motor. The steel hull is as solid as it can be. At eighty one feet and 3 inches, it has the length your crew would want in a shrimp rigger. It has two cabins, one with two bunk beds and one captain's suite. The bridge has many updated instruments for your navigation needs. The trawling nets are in great condition and as stated ready to go. The trawlers are in very good shape, as is the deck gear. There are many recent upgrades. This is ready to shrimp now. Reason for selling is the sellers age..

1967 Don Larson 57'x18' steel

$124,900

Westport, Washington

Year 1967

Make Don Larson

Model 57'x18' Steel

Category Tuna

Length 57

Posted Over 1 Month

The Don Larson is ready to put to work as an additional boat to your current fleet or a perfect opportunity to start your own venture. The vessel can use some scrubbing and paint but everything works and can be out fishing today. The Owner had the bottom painted a year an a half ago, but to get it back to its original classic look - it's been suggested that sand blasting the hull prior to the next paint would be of value. The Don Larson also has tuna pullers along with electronics that includes VHF, GPS, computer, radar, sounder, plotter, and ComNav autopilot. Stock #285249 Tonanco 729 gear! 4k gallons fuel capacity! 35 kW Isuzu 4BG1 & 6 kW Yanmar gen sets! Packs 40k# in (1) fish hold, blast-frozen! Includes tuna puller! The 1967 Don Larson has been a solid Commercial Fishing Vessel for years. The current Owner worked the vessel the last 3 seasons. The 57 foot solid steel hull has weathered multiple storms, and takes rough weather quite well for its small size. The Don Larson is capable of staying out at sea for over a month at a time. This boat was formerly known as the Medallion and was used to fish salmon as well as tuna. It has been known to be a good catcher, an important detail in salmon and tuna fishing; needless to say, it has no problems catching fish. Powered by a 6-71 Diesel Engine with 200 hp and 4,000 gallon fuel capacity that makes the long trips easy. Equipped with a Tonanco 35 kW Isuzu 4BG1 and a 6 kW Yanmar gen sets. With a 4O,000 lb fish hold that is blast-frozen capable - the Don Larson is ready to bring in the revenue. Reason for selling is downsizing.

1944 Steel Bushey Navy Tug

$179,000

Seattle, Washington

Year 1944

Make Steel

Model Bushey Navy Tug

Category Deck Boats

Length 100'

Posted Over 1 Month

1944 Steel Bushey Navy Tug This Steel Coastal Tug was originally built for the U.S. Navy to their specifications. It has been modified in the way of the engine controls, the electronics, main engine, the drum winch on the aft deck, generators, and air compressors to name some of the major components. There have been minor changes to doorways and passages. This tug was stored as USN surplus from 1944 to 1974 and has been in continual commercial operation since 1974. She has been upgraded as necessary to remain economical and commercially viable. This tug could continue commercial work for the next owner or could become a great live-aboard coastal cruiser for many NW adventures. Her air-operated control systems would allow operation by a small crew -- even a couple. Should the next owner not be interested in commercial use the seller is willing to remove some of the heavy deck gear (the huge drum winch on the aft deck for instance). The seller is also willing to make moorage available while the new owner finds space of his or her own.Currently this vessel is in the process of completing a 4,300 mile journey.These boat details are subject to contract.Note: Offers on the asking price may be considered.

1968 Chris-Craft Roamer 37 Riviera Charter Boat

$23,900

Milwaukee, Wisconsin

Year 1968

Make Chris-Craft

Model Roamer 37 Riviera Charter Boat

Category Express Cruisers

Length 37

Posted Over 1 Month

This 1968 Chris-Craft classic is in better than expected condition. The owner has kept up with all the maintenance and says nothing needs to be repaired. Definitely worth serious consideration and is ready to go! Stock #307096 A well preserved classic Chris-Craft Roamer with a steel hull, ready to go for your charter business !!! This classic 1968 Chris-Craft Roamer is set up and ready go to make your charter business dreams come true. Many, many upgrades convert this classic vessel into a modern-day tour boat. US Coast Guard (USCG) approved for 6 passengers plus crew. LED lighting throughout the boat including the dash and navigation lights. Updated 12V wiring. Entertainment features include 42" flat screen TV and Bluetooth stereo with surround sound and a subwoofer plus a Cellular WiFi router. High-end electronics include a Lowrance HDS 12 fishfinder-GPS-chartplotter with bottom imaging, a Lowrance 3G broadband radar and a marine radio with MMSI Number (Maritime Mobile Service Identity). Recent electric power upgrades include a Kohler 5EKD fuel injected 5KW generator in 2022, digital three-bank battery charger, a 3,000-watt inverter plus and an air compressor. The original 300 HP Chris-Craft 427 engines have been upgraded with electronic ignition and fuel injection. The impellers were upgraded in 2021. Includes two spare props. Many upgrades to the bilge and engine compartment include three bilge pumps, high bilge water alarm and Halon fire extinguishers. Upgraded fresh water plumbing including a pressure tank and marine water heater. Safety features include smoke detector and carbon monoxide detector. This 1968 Chris-Craft classic is an amazing opportunity for your new or existing charter business! Reason for selling is plans changed.

1988 Steel Trawler Fishing Vessel

$375

Cape Canaveral, Florida

Year 1988

Make Steel Trawler

Model Fishing Vessel

Category Commercial Boats

Length 116'

Posted Over 1 Month

1988 Steel Trawler Fishing Vessel Vessel Description TS-887 Call for more information : 321-784-5982 Size: Length: 38 m Breadth: 10m Wide: 6 , Year : 1988 Construction: Steel Design: Shrimper Trawler Engine: Deutz SBV 6M62, 1200 BHP @ 750 RPM, Gear : Reintjes Val 1840/3 Propellers Lips, Auxiliary Engines: Caterpillar 3406 DIT 176 KW @ 1800 RPM Fuel : 77.62 ton Water: 23.54 ton, Fish Hold: 200.00 m3, Speed: 12 knots, Gross Ton : 552.39 ton Equipment: Radar A JRC Color Radar, Radar B R121 o XX Rostter Scan, Sounder Suzuki ES 5300 Color, VHF, Talk Back system, LoranC, GPS, Radio Ray 150 SSB, Color Plotter JRC NOW 51, and More, Miscellaneous: Freezer boat, Winch Windlass Norskov Laursen 625 HE, Capstan Norlav 6000, Lifeboat Cador-Mat-Enc, Liferaft 2 for 20 persons, Accommodation 15 bunks, Galley and Full kitchen, Full Bathroom. Fotos are recent. Vessel working conditions and is ready to Go Price : $475,000. AMAZING DEAL JUST REDUCED TO $375,000 Sister Vessel is also available for an amazing DUO deal !!!!!!

1988 Steel Trawler Fishing Vessel

$375

Cape Canaveral, Florida

Year 1988

Make Steel Trawler

Model Fishing Vessel

Category Commercial Boats

Length 116'

Posted Over 1 Month

1988 Steel Trawler Fishing Vessel Vessel Description TS-887 Call for more information : 321-784-5982 Size: Length: 38 m Breadth: 10m Wide: 6 , Year : 1988 Construction: Steel Design: Shrimper Trawler Engine: Deutz SBV 6M62, 1200 BHP @ 750 RPM, Gear : Reintjes Val 1840/3 Propellers Lips, Auxiliary Engines: Caterpillar 3406 DIT 176 KW @ 1800 RPM Fuel : 77.62 ton Water: 23.54 ton, Fish Hold: 200.00 m3, Speed: 12 knots, Gross Ton : 552.39 ton Equipment: Radar A JRC Color Radar, Radar B R121 o XX Rostter Scan, Sounder Suzuki ES 5300 Color, VHF, Talk Back system, LoranC, GPS, Radio Ray 150 SSB, Color Plotter JRC NOW 51, and More, Miscellaneous: Freezer boat, Winch Windlass Norskov Laursen 625 HE, Capstan Norlav 6000, Lifeboat Cador-Mat-Enc, Liferaft 2 for 20 persons, Accommodation 15 bunks, Galley and Full kitchen, Full Bathroom. Fotos are recent. Vessel working conditions and is ready to Go Price : $475,000. AMAZING DEAL JUST REDUCED TO $375,000 Sister Vessel is also available for an amazing DUO deal !!!!!!

BUILDING PLANS FOR A 52-FOOT STEEL TRAWLER YACHT

$20

Chester, Nova Scotia

Year 2014

Make BOAT BUILDING PLANS FOR

Model KELTIC 52 TRAWLER

Category Trawler Boats

Length 52.0

Posted Over 1 Month

Normal 0 false false false EN-CA X-NONE X-NONE A complete set of building plans for a 52-foot steel and aluminum trawler yacht, from which two vessels were built in the early 2000’s. One sailed from the East Coast of Canada to California and on to a round trip to French Polynesia. A free information brochure may be downloaded at: http://www.kelticmarine.com/52TIP.pdf The design was approved by Lloyd’s Register of Shipping and both boats were built under their survey. Two design packages are available, a set of 155 blueprints in PDF format or a set of 168 AutoCad drawings in full color. If you do not use AutoCad, a free drawing viewer can be downloaded at: http://www.autodesk.com/products/dwg/viewers. Either set includes a copy of the original Building Specification and the US Coastguard handbook for Backyard Boatbuilders The PDF set is suitable as study plans for those contemplating building the boat while the AutoCad version is ideal for boat builders to prepare a building labour and materials estimate and also includes sixty CNC cut file drawings for automatic cutting of the steel and aluminum plates plasma or laser process. PDF Set $20.00 per copy AutoCad Set $50.00 per copy Both sets together $60.00 Due to the high memory each set of drawings will be emailed via WeTransfer upon receipt of payment by PayPal. These drawing are surplus to our requirements and are consequently sold without any future technical or commercial support. The drawings are in alphabetical order, not in sequential building order. KELTIC MARINE GROUP http://www.kelticmarine.com/kmgm.pdf 1-902-858-3366

Stainless Steel Honda Boat Propeller

$175

Hanahan, South Carolina

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

Like new 3X15X19R stainless steel boat prop.. Came off of a 2006 Honda BF 200HP four stroke outboard motor. Barely been used. Retails for over $400!

36' Steel Work Tug Boat

$18,000

New York, New York

Year -

Make -

Model -

Category -

Length -

Posted Over 1 Month

36' Steel Tug Work Boat Twin 671's Detroit DieselsEngines Run Great, has great power for towing barges and as a all around work boat. Steel Hull is Solid Handles wellNeeds to be cleaned upDeck is very rustySold as is where is. Any questions feel free to call or text Evan [email protected]